Volume Measurement Range calculator.
Show how stated measurement tolerances affect a rectangular volume.
Your inputs
Use measurements from your plan and properties from your chosen product. Any prefilled values are illustrative.
A clear estimate starts here.
Enter your dimensions and product details to see the quantity and purchase breakdown.
Formula and assumptions
How this calculation works.
Multiplies lower and upper dimension bounds separately. Errors are not assumed independent or normally distributed, and the result is not a probabilistic prediction.
A worked example
Illustrative inputs only. Product properties and design dimensions are not recommendations for your project.
- Measured length
- 4 m
- Measured width
- 3 m
- Measured depth
- 100 mm
- Stated length uncertainty
- 0.1 m
- Stated width uncertainty
- 0.1 m
- Stated depth uncertainty
- 10 mm
Upper geometric bound: 1.4 m³
These are supplied worst-case dimension bounds, not a confidence interval or a recommended order allowance.
Before you purchase
Use dimensions from your plan and properties from your chosen product. Any design spacing, section or fixing pattern must already be specified.
Multiplies lower and upper dimension bounds separately. Errors are not assumed independent or normally distributed, and the result is not a probabilistic prediction.
Dimensions, quantities, prices, timing and product properties are supplied by you. This tool does not select construction specifications or assess structural, electrical or hydraulic suitability.
Method: dimensional arithmetic and user-supplied specifications. Software checks: 2026-10-04. Calculation and review policy.