Materials.
Know what to measure, what to read on the package and which calculation to use. Keep a free preparation sheet for your selected material.
Start with your material family
Bagged concrete mix
Start with the net prepared concrete volume; deduct known voids before converting to bags.
Prepare measurements and purchase data →Concrete and form materialsReady-mixed concrete deliveries
Combine measured components without counting intersecting volumes twice.
Prepare measurements and purchase data →Concrete and form materialsFormwork sheet stock
List each complete panel blank and distinguish its cutting size from the surface touching concrete.
Prepare measurements and purchase data →Concrete and form materialsFormwork edge boards
Measure each separate edge run and the board face that will contact the pour.
Prepare measurements and purchase data →Concrete and form materialsReinforcement bar stock
Transcribe the lengths and counts from the supplied reinforcement schedule.
Prepare measurements and purchase data →Concrete and form materialsWelded mesh sheets
Measure the supplied coverage rectangle and keep each specified lap separate from gross sheet size.
Prepare measurements and purchase data →Concrete and form materialsPour separation sheeting
Measure the supplied footprint and list the required strip direction and seam allowance.
Prepare measurements and purchase data →Concrete and form materialsReusable form panels
Record the required panel population for each planned pour stage.
Prepare measurements and purchase data →Masonry and joint materialsBrick units
Measure courses and the specified masonry module, including openings and closure positions.
Prepare measurements and purchase data →Masonry and joint materialsHollow masonry blocks
List wall runs, openings and the already specified block module.
Prepare measurements and purchase data →Masonry and joint materialsMortar bag mix
Use a measured or already specified prepared mortar volume rather than guessing it from dry bag mass.
Prepare measurements and purchase data →Masonry and joint materialsBrick slip flats
Measure flat face areas after allocating all specified corner strips.
Prepare measurements and purchase data →Masonry and joint materialsBrick slip corner pieces
Measure the corner height and both supplied returns separately from the remaining flat field.
Prepare measurements and purchase data →Masonry and joint materialsMasonry closure pieces
List each prescribed partial unit and its finished length.
Prepare measurements and purchase data →Masonry and joint materialsMasonry special units
Create separate schedule lines for every different shape and handed variant.
Prepare measurements and purchase data →Landscape materialsBulk soil fill
Measure the internal fill space and deduct already occupied layers or objects.
Prepare measurements and purchase data →Landscape materialsSoil blend components
Record the total intended blend volume and component proportions on one common basis.
Prepare measurements and purchase data →Landscape materialsMulch top-up material
Measure area and the additional depth required above the existing layer.
Prepare measurements and purchase data →Landscape materialsLandscape sand
Measure the selected layer or void using the thickness already given in the plan.
Prepare measurements and purchase data →Landscape materialsGravel and aggregate
Separate the measured placed volume from the delivery quantity.
Prepare measurements and purchase data →Landscape materialsSod and turf rolls
Measure complete strip lengths and list narrow or irregular areas separately.
Prepare measurements and purchase data →Landscape materialsLandscape edging pieces
Measure each continuous run, with supplied corner and connector details listed separately.
Prepare measurements and purchase data →Landscape materialsModular pavers
Measure the supplied pattern grid and distinguish full modules from edge pieces.
Prepare measurements and purchase data →Paint and finish suppliesInterior wall paint
Measure only the surfaces assigned to this paint, deducting known openings.
Prepare measurements and purchase data →Three things to bring to a quantity calculation
- Measured net geometry: actual surfaces, separate runs or complete piece sizes.
- Your selected product data: useful coverage, prepared yield, actual stock dimensions or pieces per pack.
- Your purchase decisions: supplied allowances, whether leftovers are usable, and which identical products can share an order.
Each material sheet explains its quantity basis and a common ordering mistake. Product values and construction details remain yours to supply. Read the calculation scope.