MATERIAL PREPARATION LIBRARY
Joint, edge and liner supplies.
Choose the actual material and supply form. Each sheet identifies what to measure, which product data to collect and a purchase assumption to check.
Edge banding rolls
List the supplied exposed panel edges as full individual strip cuts.
Prepare this material →Sealant cartridges
Measure the supplied filled cross-section and every separate joint run.
Prepare this material →Specified volume mix components
Record total selected mixture volume and the already supplied ratio basis.
Prepare this material →Specified mass mix components
Record the selected final mass or supplied component mass basis.
Prepare this material →Pool liner material
Measure the supplied internal shell surfaces and any explicitly chosen pattern returns.
Prepare this material →Pool surface coating
Allocate the measured internal surfaces to each explicitly selected coating product.
Prepare this material →How these quantities differ
| Material | Selected product data | Ordering mistake to avoid |
|---|---|---|
| Edge banding rolls | Roll length and supplied end trimming allowance. | An area estimate overlooks long continuous strips that may not fit the remaining roll. |
| Sealant cartridges | Usable prepared volume per cartridge. | Linear joint metres without width and depth cannot establish cartridge count. |
| Specified volume mix components | Volume ratio and package volumes of each separately identified component. | A ratio expressed as parts of base differs from a percentage of final mixture. |
| Specified mass mix components | The provided weight ratio and each package mass. | Weight ratio and volume ratio cannot be interchanged without compatible supplied densities. |
| Pool liner material | Usable sheet or roll dimensions and the supplied seam allowances. | Water footprint area excludes the sides and floor faces needing liner. |
| Pool surface coating | Supplied coverage, coat count and container volume. | Water volume is not the coating surface area. |
Browse every material family or keep calculated orders in a free browser project.