Floor coverings and accessories.
Choose the actual material and supply form. Each sheet identifies what to measure, which product data to collect and a purchase assumption to check.
Floor plank packs
Measure each room and the supplied row direction, keeping width and length constraints visible.
Prepare this material →Carpet roll stock
Measure complete strips with the specified direction and any pattern repeat.
Prepare this material →Floor underlay
Measure the layer's coverage area and supplied strip direction or overlap.
Prepare this material →Floor tile packs
Measure rows and columns using the selected orientation and supplied joint width.
Prepare this material →Tile grout
Use the supplied joint network, joint width and filled depth.
Prepare this material →Floor adhesive
Measure only the surfaces receiving this one selected adhesive.
Prepare this material →Floor transition strips
Measure each separate transition span and any supplied end-cut allowances.
Prepare this material →Carpet seam tape
List only the seams in the supplied carpet strip plan.
Prepare this material →How these quantities differ
| Material | Selected product data | Ordering mistake to avoid |
|---|---|---|
| Floor plank packs | Plank dimensions, pieces or area per pack and usable cut allowances. | Area-only pack arithmetic does not show whether full rows and end cuts fit. |
| Carpet roll stock | Roll width, usable length and the chosen repeat or end allowance. | Square area can underestimate purchased length when a room needs several full-width strips. |
| Floor underlay | Pack area or roll width and length, and layer thickness if checking a supplied height stack. | Net pack area and overlapped roll coverage represent different quantity bases. |
| Floor tile packs | Tile dimensions, pieces per pack and the exact layout colour mix. | Net floor area divided by tile area does not account for a whole-piece grid or separate colours. |
| Tile grout | Prepared grout density or product yield, package mass and the specified mix basis if relevant. | Tile thickness need not equal the actual filled joint depth. |
| Floor adhesive | Coverage for the specified application basis and actual package size. | A container's nominal volume does not establish square-area coverage for every application. |
| Floor transition strips | Usable stock length, required finished lengths and reserved cut gap. | Summing doorway widths does not establish that separate pieces fit a stock length. |
| Carpet seam tape | Tape roll length and any supplied start or end allowances. | Room perimeter and strip seams are different tape paths. |
Browse every material family or keep calculated orders in a free browser project.