Decorative panels and faces.
Choose the actual material and supply form. Each sheet identifies what to measure, which product data to collect and a purchase assumption to check.
Decorative slat stock
Measure the face width and the already supplied full-slat width and gap.
Prepare this material →Perforated panel faces
Measure panel face dimensions and supply the count and diameter of contained, non-overlapping holes.
Prepare this material →Panel wrap fabric
Measure the face and all supplied depth returns and rear wrapping margins.
Prepare this material →Decorative baffle finish
Count every specified coated face and narrow edge for each baffle.
Prepare this material →Perforation mask discs
List the required disc diameter and count on the selected sheet cutting basis.
Prepare this material →Elliptical frame finish
Measure the outer and inner elliptical face axes separately.
Prepare this material →Regular polygon frame finish
Use the supplied regular polygon geometry and the specified uniform inset.
Prepare this material →Alternating-radius star finish
Record the supplied outer and inner radii and number of star points.
Prepare this material →Rounded border face finish
Measure the outer rounded face and its supplied matched inner inset.
Prepare this material →Arc band face finish
Measure outer and inner radii and the supplied arc angle.
Prepare this material →How these quantities differ
| Material | Selected product data | Ordering mistake to avoid |
|---|---|---|
| Decorative slat stock | Slat stock length and actual retained width. | A final narrow edge space is not another full-width slat. |
| Perforated panel faces | Selected coating coverage if treating the remaining solid face. | Open-area percentage does not predict sound absorption, ventilation or strength. |
| Panel wrap fabric | Roll width, usable length and explicitly permitted orientation. | Front face area alone omits the fabric required around edges and onto the back. |
| Decorative baffle finish | Actual thickness, chosen face selection, coats and coverage. | Painting both sides doubles broad-face area before any edge faces are added. |
| Perforation mask discs | Stock sheet dimensions and reserved spacing between complete square cells. | Disc area alone can imply more masks than fit in a square-cell stock plan. |
| Elliptical frame finish | Selected coverage, coats and container size. | The surrounding frame face is outer ellipse area minus its actual inner opening. |
| Regular polygon frame finish | Selected coats and liquid coverage. | Subtracting a side-length allowance does not directly produce a uniform normal-width inset. |
| Alternating-radius star finish | Selected coverage and any supplied cutout area. | A star's bounding circle is much larger than its actual painted face. |
| Rounded border face finish | Actual radii, inset and finish coverage. | Reducing width and length while retaining the wrong corner radius misstates the remaining band area. |
| Arc band face finish | Selected coat count and coverage per container. | A curved strip is a sector band, not a full annulus. |
Browse every material family or keep calculated orders in a free browser project.