Decorative slat stock.
Measure the face width and the already supplied full-slat width and gap.
Read the right quantitative data
Slat stock length and actual retained width.
Check this ordering assumption
A final narrow edge space is not another full-width slat.
Layout and acoustic, load or attachment performance are not chosen by this count.
A worked quantity method
This illustrative set of supplied inputs demonstrates Decorative Full Slat Face Stock Calculator. Replace the example measurements and product figures with your own before ordering.
| Supplied input | Metric display | US display |
|---|---|---|
| Selected stock length | 3 m | 9.84 ft |
| Your extra length reserved per cut | 0 m | 0 ft |
| Selected slat face width | 100 mm | 3.94 in |
| Gap already supplied for the face | 100 mm | 3.94 in |
| Measured decorative face 1: Measured face width | 1 m | 3.28 ft |
| Measured decorative face 1: Measured strip height | 2 m | 6.56 ft |
| Measured decorative face 1: Identical faces | 1 | 1 |
Slat stock lengths: 5 lengths
- Supplied face strips
- 5
Continuous cuts use decreasing-length first-fit packing. This is a feasible count, not a guarantee of the minimum. Any per-cut extra is explicitly reserved by you. Only whole-width slats that fit are counted. Unfilled edge space is not assigned another trimmed slat. This is decorative quantity arithmetic, not acoustic performance.
Open this example in the full calculatorYour measurement and product-data sheet
Record what you know and mark verified items ready. Notes save on this browser after you edit them. Download a copy before clearing browser data.
Measure the face width and the already supplied full-slat width and gap.
Slat stock length and actual retained width.
A final narrow edge space is not another full-width slat.
Input for Decorative Full Slat Face Stock Calculator. Record the value with its unit and quantity basis.
Input for Decorative Full Slat Face Stock Calculator. Record the value with its unit and quantity basis.
Input for Decorative Full Slat Face Stock Calculator. Record the value with its unit and quantity basis.
Input for Decorative Full Slat Face Stock Calculator. Record the value with its unit and quantity basis.
Input for Decorative Full Slat Face Stock Calculator. Record the value with its unit and quantity basis.
Input for Decorative Full Slat Face Stock Calculator. Record the value with its unit and quantity basis.
Input for Decorative Full Slat Face Stock Calculator. Record the value with its unit and quantity basis.
Choose your next calculation
Decorative Full Slat Face Stock Calculator
Count whole-width supplied decorative face strips that fit across measured rectangles and preserve complete vertical cut fit.
Stock Cut List Calculator
Group required straight cuts into available equal-length stock, allowing for kerf and end trimming.
Turn the estimate into an order
- Confirm that all quantities use the same measured basis and the selected product's current data.
- Keep different products, finishes and handed variants in separate purchase lines.
- Review exact demand and whole-pack purchase quantities before entering your quoted prices.
- Record compatible stock already on hand, then save the remaining order in your browser project.
Measurement and purchase guides
- How to measure and order: decorative panels, fabric covers and supplied attachment counts
- Face-only fabric reference versus complete wrap blanks: quantity checks
- Apply banding cut allowance to every selected edge
- A reproducible two-stock cut plan can still cost more than another plan
- Keep first-emitter offset in a specified dripline takeoff
- Purchased stock length is not installed finished length
Other materials in this family
Reviewed 6 October 2026. Geometry and purchase arithmetic use your measurements and selected specifications. Calculation scope.