Asphalt Layer Mass and Delivery Order calculator.
Order supplied asphalt layer quantities by matching placed density and supplier mass increments. Layer depths, mix suitability, compaction and pavement design remain supplied specifications.
Your inputs
Use measurements from your plan and properties from your chosen product. Any prefilled values are illustrative.
A clear estimate starts here.
Enter your dimensions and product details to see the quantity and purchase breakdown.
Formula and assumptions
How this calculation works.
Order supplied asphalt layer quantities by matching placed density and supplier mass increments. Layer depths, mix suitability, compaction and pavement design remain supplied specifications. Mass = Σ(net area × specified placed depth × matching placed density) × allowance; order = ceil(mass / supplier mass increment) × increment; cost = order kg × entered USD/kg + delivery.
A worked example
Illustrative inputs only. Product properties and design dimensions are not recommendations for your project.
- Supplier mass order increment
- 1,000 kg
- Your quoted USD per kilogram
- 0.1
- Your quoted delivery charge
- 50.00 USD
- Your material allowance
- 0 %
- Measured layer area
- 20 m²
- Excluded area
- 0 m²
- Specified placed depth
- 50 mm
- Supplier density on the same placed basis
- 2,400 kg/m³
- Measured layer area
- 10 m²
- Excluded area
- 0 m²
- Specified placed depth
- 30 mm
- Supplier density on the same placed basis
- 2,400 kg/m³
Supplier order mass: 4,000 kg
Rows are layers of the same purchasable mix. Run different mixes separately. Density must match placed depth; no mix, thickness or compaction specification is chosen.
Before you purchase
Use dimensions from your plan and properties from your chosen product. Any design spacing, section or fixing pattern must already be specified.
Counts quantities from an existing supplied specification. Does not design construction, certify safety, recommend application requirements or establish code compliance.
Example dimensions and product properties are illustrative arithmetic inputs only. Obtain actual yield, density and coverage from your selected supplier.
Monetary arithmetic uses decimal values. Quoted amounts round half-up to cents at the stated cost-line boundaries; measurements remain approximate.
Method: dimensional arithmetic and user-supplied specifications. Software checks: 2026-10-08. Calculation and review policy.