MEASURE ONCE. PLAN YOUR PURCHASE.

Brick Slip Flat and Corner Pack calculator.

Remove corner leg coverage from flat-slip demand and order corner units separately using each product pack.

CLADDING

Your inputs

Use measurements from your plan and properties from your chosen product. Any prefilled values are illustrative.

Total measured facade area including corner legs

ft²

Measured openings

ft²

Specified first corner face width

Specified second corner face width

Chosen corner unit height

Where to get this value

Measure this dimension in your plan or on site and use the displayed unit. For irregular shapes, divide the geometry into the supported sections.

Specified joint width

Where to get this value

Copy this specification from your supplied design or product documentation. This tool does not select spacing, fixing patterns or structural requirements.

Flat slip width

Where to get this value

Measure this dimension in your plan or on site and use the displayed unit. For irregular shapes, divide the geometry into the supported sections.

Flat slip height

Where to get this value

Measure this dimension in your plan or on site and use the displayed unit. For irregular shapes, divide the geometry into the supported sections.

Flat slips per pack

Where to get this value

Use the actual usable quantity or dimensions of the product you intend to buy. Check the label and the unit shown here.

Corner units per pack

Where to get this value

Use the actual usable quantity or dimensions of the product you intend to buy. Check the label and the unit shown here.

Your additional material allowance

Where to get this value

Enter your own allowance. Presets are input shortcuts, not a construction recommendation.

Outside corner 1

Measured corner height

Where to get this value

Measure this dimension in your plan or on site and use the displayed unit. For irregular shapes, divide the geometry into the supported sections.

Identical corners

YOUR ESTIMATE

∑

A clear estimate starts here.

Enter your dimensions and product details to see the quantity and purchase breakdown.

CONTINUE YOUR PLAN

Find the next material.

Keep the quantity, then use another tool for the remaining parts of your purchase.

Explore all calculators

Formula and assumptions

BEHIND THE NUMBERS

How this calculation works.

Remove corner leg coverage from flat-slip demand and order corner units separately using each product pack. Flat area = facade − openings − Σ(corner height × two face legs); corner units retain ceil(height / corner course pitch) per corner.

Flat area = facade − openings − Σ(corner height × two face legs); corner units retain ceil(height / corner course pitch) per corner.Calculated with normalised units

A worked example

Illustrative inputs only. Product properties and design dimensions are not recommendations for your project.

Total measured facade area including corner legs: 10 m²
Measured openings: 0 m²
Specified first corner face width: 200 mm
Specified second corner face width: 100 mm
Chosen corner unit height: 100 mm
Specified joint width: 0 mm
Flat slip width: 200 mm
Flat slip height: 100 mm
Flat slips per pack: 50
Corner units per pack: 10
Your additional material allowance: 0 %
Measured corner height: 2 m
Identical corners: 1

Separate flat and corner packs: 12 packs

Facade area includes both corner legs. Corner face strips are removed from flat demand once; corner counts retain separate vertical rounding. This does not select a facade assembly or assess adhesion.

Before you purchase

Use dimensions from your plan and properties from your chosen product. Any design spacing, section or fixing pattern must already be specified.

All product dimensions, coverage, density, allowances and joining rules must come from your supplied plan or selected product. No building-code values are inserted.

Method: dimensional arithmetic and user-supplied specifications. Software checks: 2026-10-05. Calculation and review policy.