PACKAGES AND LEFTOVERS

Brick slip flat and corner pack — corner units per pack scenarios.

How does changing corner units per pack affect brick slip flat and corner pack when the other inputs stay fixed?

What this decision changes

A package quantity is a purchasing denominator. It does not change the net requirement of the measured task. Method basis: Remove corner leg coverage from flat-slip demand and order corner units separately using each product pack. Flat area = facade − openings − Σ(corner height × two face legs); corner units retain ceil(height / corner course pitch) per corner.

The focus is corner units per pack. All other shared inputs remain fixed for each evaluated range.

Flat area = facade − openings − Σ(corner height × two face legs); corner units retain ceil(height / corner course pitch) per corner.Brick Slip Flat and Corner Pack Calculator

Evaluate your supplied alternatives

Start with your measured plan and selected product data. The initial values and range are illustrative. Each scenario changes only corner units per pack; the other entered values stay fixed.

Display units

Measured plan and product inputs

Total measured facade area including corner legs

m²

Measured openings

m²

Specified first corner face width

Specified second corner face width

Chosen corner unit height

Where to get this value

Measure this dimension in your plan or on site and use the displayed unit. For irregular shapes, divide the geometry into the supported sections.

Specified joint width

Where to get this value

Copy this specification from your supplied design or product documentation. This tool does not select spacing, fixing patterns or structural requirements.

Flat slip width

Where to get this value

Measure this dimension in your plan or on site and use the displayed unit. For irregular shapes, divide the geometry into the supported sections.

Flat slip height

Where to get this value

Measure this dimension in your plan or on site and use the displayed unit. For irregular shapes, divide the geometry into the supported sections.

Flat slips per pack

Where to get this value

Use the actual usable quantity or dimensions of the product you intend to buy. Check the label and the unit shown here.

Corner units per pack

Where to get this value

Use the actual usable quantity or dimensions of the product you intend to buy. Check the label and the unit shown here.

Your additional material allowance

Where to get this value

Enter your own allowance. Presets are input shortcuts, not a construction recommendation.

Outside corner 1

Measured corner height

Where to get this value

Measure this dimension in your plan or on site and use the displayed unit. For irregular shapes, divide the geometry into the supported sections.

Identical corners

Supplied comparison range for corner units per pack

Lower supplied comparison value

Where to get this value

Use the actual usable quantity or dimensions of the product you intend to buy. Check the label and the unit shown here.

Upper supplied comparison value

Where to get this value

Use the actual usable quantity or dimensions of the product you intend to buy. Check the label and the unit shown here.

Nine evenly spaced values are evaluated. Whole counts are rounded to distinct integer scenarios. Values between the listed samples are not calculated.

9 evaluated scenarios

Baseline: Separate flat and corner packs — 12 packs. Rejected combinations remain visible below.

Quantity to plot

Each bar is one actual calculated separate flat and corner packs. Horizontal values: corner units per pack in the supplied count basis.

Corner units per pack	Separate flat and corner packs	Change from baseline	Use this scenario
5	14 packs	2 packs	Open in calculator Exact quantity breakdown Flat field area with allowance 9.4 m² Flat slips to order 470 Corner units to order 20 Flat packs 10 packs Corner packs 4 packs Facade area includes both corner legs. Corner face strips are removed from flat demand once; corner counts retain separate vertical rounding. This does not select a facade assembly or assess adhesion.
6	14 packs	2 packs	Open in calculator Exact quantity breakdown Flat field area with allowance 9.4 m² Flat slips to order 470 Corner units to order 20 Flat packs 10 packs Corner packs 4 packs Facade area includes both corner legs. Corner face strips are removed from flat demand once; corner counts retain separate vertical rounding. This does not select a facade assembly or assess adhesion.
8	13 packs	1 pack	Open in calculator Exact quantity breakdown Flat field area with allowance 9.4 m² Flat slips to order 470 Corner units to order 20 Flat packs 10 packs Corner packs 3 packs Facade area includes both corner legs. Corner face strips are removed from flat demand once; corner counts retain separate vertical rounding. This does not select a facade assembly or assess adhesion.
9	13 packs	1 pack	Open in calculator Exact quantity breakdown Flat field area with allowance 9.4 m² Flat slips to order 470 Corner units to order 20 Flat packs 10 packs Corner packs 3 packs Facade area includes both corner legs. Corner face strips are removed from flat demand once; corner counts retain separate vertical rounding. This does not select a facade assembly or assess adhesion.
11	12 packs	0 packs	Open in calculator Exact quantity breakdown Flat field area with allowance 9.4 m² Flat slips to order 470 Corner units to order 20 Flat packs 10 packs Corner packs 2 packs Facade area includes both corner legs. Corner face strips are removed from flat demand once; corner counts retain separate vertical rounding. This does not select a facade assembly or assess adhesion.
12	12 packs	0 packs	Open in calculator Exact quantity breakdown Flat field area with allowance 9.4 m² Flat slips to order 470 Corner units to order 20 Flat packs 10 packs Corner packs 2 packs Facade area includes both corner legs. Corner face strips are removed from flat demand once; corner counts retain separate vertical rounding. This does not select a facade assembly or assess adhesion.
13	12 packs	0 packs	Open in calculator Exact quantity breakdown Flat field area with allowance 9.4 m² Flat slips to order 470 Corner units to order 20 Flat packs 10 packs Corner packs 2 packs Facade area includes both corner legs. Corner face strips are removed from flat demand once; corner counts retain separate vertical rounding. This does not select a facade assembly or assess adhesion.
15	12 packs	0 packs	Open in calculator Exact quantity breakdown Flat field area with allowance 9.4 m² Flat slips to order 470 Corner units to order 20 Flat packs 10 packs Corner packs 2 packs Facade area includes both corner legs. Corner face strips are removed from flat demand once; corner counts retain separate vertical rounding. This does not select a facade assembly or assess adhesion.
16	12 packs	0 packs	Open in calculator Exact quantity breakdown Flat field area with allowance 9.4 m² Flat slips to order 470 Corner units to order 20 Flat packs 10 packs Corner packs 2 packs Facade area includes both corner legs. Corner face strips are removed from flat demand once; corner counts retain separate vertical rounding. This does not select a facade assembly or assess adhesion.

Read the evaluated results

Inspect the purchase staircase and the resulting quantity lines. Larger packages can reduce package count while increasing unused compatible stock.

Replace every illustrative baseline measurement and selected product value with the inputs for your actual task.
Enter a comparison range on the focused input's stated unit and quantity basis.
Review rejected combinations and use the exact detail lines to distinguish measured demand from whole purchases.
Open an evaluated scenario in the full calculator to save its original inputs and quantity breakdown to a browser material project.

Keep the comparison within scope

Different package sizes can share an order comparison only when the selected contents and quantity bases are interchangeable.

Counts the arithmetic consequences of supplied specifications. Does not select construction systems, structural properties, fastening schedules, safe handling limits or code compliance.

Only the listed samples are evaluated. Intermediate values, alternate constraints and global cutting optimality are not inferred from the graph.

Continue with this quantity method

Brick Slip Flat and Corner Pack Calculator

Other independent input decisions

Prepare the actual material data

Read the measurement and purchase guides

Quantity method and illustrative scenarios checked 6 October 2026. Methods and scope.