SUPPLIED LAYOUT INTERVALS

Fence post — maximum post spacing scenarios.

How does changing maximum post spacing affect fence post when the other inputs stay fixed?

What this decision changes

The chosen interval or repeat changes discrete positions, full rows or complete pattern cuts. It is different from a blanket percentage added to area. Method basis: A straight run includes both end posts. Shared corner and gate posts must be accounted for in a full project.

The focus is specified maximum post spacing. All other shared inputs remain fixed for each evaluated range.

Posts = ceil(run length ÷ specified spacing) + 1Fence Post Calculator

Evaluate your supplied alternatives

Start with your measured plan and selected product data. The initial values and range are illustrative. Each scenario changes only specified maximum post spacing; the other entered values stay fixed.

Display units

Measured plan and product inputs

Solid run length (exclude gates)

Where to get this value

Measure this dimension in your plan or on site and use the displayed unit. For irregular shapes, divide the geometry into the supported sections.

Specified maximum post spacing

Where to get this value

Copy this specification from your supplied design or product documentation. This tool does not select spacing, fixing patterns or structural requirements.

Supplied comparison range for specified maximum post spacing

Lower supplied comparison value

Where to get this value

Copy this specification from your supplied design or product documentation. This tool does not select spacing, fixing patterns or structural requirements.

Upper supplied comparison value

Where to get this value

Copy this specification from your supplied design or product documentation. This tool does not select spacing, fixing patterns or structural requirements.

Nine evenly spaced values are evaluated. Whole counts are rounded to distinct integer scenarios. Values between the listed samples are not calculated.

9 evaluated scenarios

Baseline: Posts in this run — 5 posts. Rejected combinations remain visible below.

Quantity to plot

Each bar is one actual calculated posts in this run. Horizontal values: specified maximum post spacing in m.

Specified maximum post spacing	Posts in this run	Change from baseline	Use this scenario
1.8 m	7 posts	2 posts	Open in calculator Exact quantity breakdown Equal bays 6 Resulting bay length 1.666667 m
2.175 m	6 posts	1 posts	Open in calculator Exact quantity breakdown Equal bays 5 Resulting bay length 2 m
2.55 m	5 posts	0 posts	Open in calculator Exact quantity breakdown Equal bays 4 Resulting bay length 2.5 m
2.925 m	5 posts	0 posts	Open in calculator Exact quantity breakdown Equal bays 4 Resulting bay length 2.5 m
3.3 m	5 posts	0 posts	Open in calculator Exact quantity breakdown Equal bays 4 Resulting bay length 2.5 m
3.675 m	4 posts	-1 posts	Open in calculator Exact quantity breakdown Equal bays 3 Resulting bay length 3.333333 m
4.05 m	4 posts	-1 posts	Open in calculator Exact quantity breakdown Equal bays 3 Resulting bay length 3.333333 m
4.425 m	4 posts	-1 posts	Open in calculator Exact quantity breakdown Equal bays 3 Resulting bay length 3.333333 m
4.8 m	4 posts	-1 posts	Open in calculator Exact quantity breakdown Equal bays 3 Resulting bay length 3.333333 m

Read the evaluated results

Use the evaluated count steps to see when another row, column, drop or position enters the stated layout.

Replace every illustrative baseline measurement and selected product value with the inputs for your actual task.
Enter a comparison range on the focused input's stated unit and quantity basis.
Review rejected combinations and use the exact detail lines to distinguish measured demand from whole purchases.
Open an evaluated scenario in the full calculator to save its original inputs and quantity breakdown to a browser material project.

Keep the comparison within scope

Compare intervals already permitted by your plan or product. No safe spacing, structural layout or fixing requirement is chosen.

Only quantities from supplied dimensions and specifications are calculated.

No material-property reference values are bundled; obtain product values from the selected supplier's data sheet.

Only the listed samples are evaluated. Intermediate values, alternate constraints and global cutting optimality are not inferred from the graph.

Continue with this quantity method

Fence Post Calculator

Other independent input decisions

Read the measurement and purchase guides

Reconcile shared fence posts at adjacent run ends

Quantity method and illustrative scenarios checked 6 October 2026. Methods and scope.