MEASURE ONCE. PLAN YOUR PURCHASE.

Brick Quantity calculator.

Count bricks in wall faces from the selected brick module, openings and specified leaves.

MASONRY

Your inputs

Use measurements from your plan and properties from your chosen product. Any prefilled values are illustrative.

Actual brick length

Where to get this value

Measure this dimension in your plan or on site and use the displayed unit. For irregular shapes, divide the geometry into the supported sections.

Actual brick height

Where to get this value

Measure this dimension in your plan or on site and use the displayed unit. For irregular shapes, divide the geometry into the supported sections.

Specified bed / head joint

Where to get this value

Copy this specification from your supplied design or product documentation. This tool does not select spacing, fixing patterns or structural requirements.

Specified masonry leaves

Waste allowance

Shortcuts only; choose your own allowance above.

Where to get this value

Enter your own allowance. Presets are input shortcuts, not a construction recommendation.

Wall face 1

Wall length

Where to get this value

Measure this dimension in your plan or on site and use the displayed unit. For irregular shapes, divide the geometry into the supported sections.

Wall height

Where to get this value

Measure this dimension in your plan or on site and use the displayed unit. For irregular shapes, divide the geometry into the supported sections.

Opening area

ft²

Where to get this value

Measure only the area, length or quantity to deduct, in the unit shown. Keep this consistent with the surface being calculated.

YOUR ESTIMATE

∑

A clear estimate starts here.

Enter your dimensions and product details to see the quantity and purchase breakdown.

CONTINUE YOUR PLAN

Find the next material.

Keep the quantity, then use another tool for the remaining parts of your purchase.

Explore all calculators

Formula and assumptions

BEHIND THE NUMBERS

How this calculation works.

The module includes one head joint and one bed joint. Each wall rounds up before the allowance. Special bonds, corner cuts and nonrectangular faces require your own additional quantity.

Bricks = ceil(Σceil(net wall area / brick module area) × leaves × allowance)Calculated with normalised units