MetandumFREE TOOLS. NO SUBSCRIPTION.Find a calculator ⌕My projects
MEASURE ONCE. PLAN YOUR PURCHASE.

Drywall Sheet Layout calculator.

Count sheets by surface layout and supplied layers, with explicit opening deductions.

WALLS

Your inputs

lengthheight

Measurement schematic, not to scale. Use your own dimensions and product specification.

Use measurements from your plan and properties from your chosen product. Any prefilled values are illustrative.

Where to get this value

Measure this dimension in your plan or on site and use the displayed unit. For irregular shapes, divide the geometry into the supported sections.

Where to get this value

Measure this dimension in your plan or on site and use the displayed unit. For irregular shapes, divide the geometry into the supported sections.

Shortcuts only; choose your own allowance above.
Where to get this value

Enter your own allowance. Presets are input shortcuts, not a construction recommendation.

Surface 1
Where to get this value

Measure this dimension in your plan or on site and use the displayed unit. For irregular shapes, divide the geometry into the supported sections.

Where to get this value

Measure this dimension in your plan or on site and use the displayed unit. For irregular shapes, divide the geometry into the supported sections.

Where to get this value

Measure only the area, length or quantity to deduct, in the unit shown. Keep this consistent with the surface being calculated.

Quantity and planning estimate
YOUR ESTIMATE
∑

A clear estimate starts here.

Enter your dimensions and product details to see the quantity and purchase breakdown.

CONTINUE YOUR PLAN

Find the next material.

Keep the quantity, then use another tool for the remaining parts of your purchase.

Explore all calculators
Formula and assumptions
BEHIND THE NUMBERS

How this calculation works.

The rectangular grid rounds rows and columns to whole sheets. Openings only reduce sheet count when you explicitly identify full sheet positions that can be omitted.

Sheets = Σmax(grid sheets − explicit omissions, ceil(net area / sheet area)) × layersCalculated with normalised units

A worked example

Illustrative inputs only. Product properties and design dimensions are not recommendations for your project.

Sheet width
1.2 m
Sheet length
2.4 m
Specified layers
2
Waste allowance
0 %
Surface 1
Surface width
4 m
Surface height
2.4 m
Opening area
2 m²
Full sheets omitted in your layout
0

Drywall sheets to purchase: 8 sheets

This is a purchase layout estimate; no fire rating, fixing pattern, edge support or structural suitability is assessed.

Before you purchase

Use dimensions from your plan and properties from your chosen product. Any design spacing, section or fixing pattern must already be specified.

Method: dimensional arithmetic and user-supplied specifications. Software checks: 2026-10-04. Calculation and review policy.

Check your purchase assumptions

Separate hidden sheet layers from the finished joint-tape layerDistinguish opening area from whole omitted sheetsEstimate compound from supplied application dimensions

Keep the project moving.

Explore walls
LumberWall Stud Quantity Calculator

Count studs in uninterrupted spans and add the opening and corner details from your plan.

WallsInsulation Quantity Calculator

Pool the net areas of several surfaces for a product with supplied pack coverage and thickness.

Connected work guides and comparisons

Explore wall panels, battens and ceiling grids

Browse all work types

Prepare your material measurements and product data

Drywall sheets

Find material sheets for this calculator

Compare supplied alternatives and quantity changes

Browse all quantity scenarios