Floor Protection Roll Cut Order calculator.
Cover measured rectangular work areas with continuous protective strips, explicit overlap and an optional supplied edge upturn.
Your inputs
Use measurements from your plan and properties from your chosen product. Any prefilled values are illustrative.
A clear estimate starts here.
Enter your dimensions and product details to see the quantity and purchase breakdown.
Formula and assumptions
How this calculation works.
Lanes = ceil((expanded width − overlap)/(roll width − overlap)); pack each expanded room-length strip into selected rolls.
A worked example
Illustrative inputs only. Product properties and design dimensions are not recommendations for your project.
- Selected roll width
- 1 m
- Selected roll length
- 10 m
- Your specified lane overlap
- 0 mm
- Your specified edge upturn
- 0 mm
- Measured width across lanes
- 3 m
- Measured strip direction length
- 4 m
- Identical areas
- 1
Protection rolls: 2 rolls
Decreasing-length first-fit packing is feasible, not guaranteed optimal. Side remnants are not reused; no joining is assumed. Protection suitability is not selected.
Before you purchase
Use dimensions from your plan and properties from your chosen product. Any design spacing, section or fixing pattern must already be specified.
Measurements, product properties and application patterns are supplied by you. Illustrative examples do not recommend construction or planting specifications.
Method: dimensional arithmetic and user-supplied specifications. Software checks: 2026-10-05. Calculation and review policy.