Glazing Gasket Perimeter Loop Order calculator.
Keep separate opening perimeters intact when cutting gasket rolls, or pool length only under your permitted joint plan.
Your inputs
Use measurements from your plan and properties from your chosen product. Any prefilled values are illustrative.
A clear estimate starts here.
Enter your dimensions and product details to see the quantity and purchase breakdown.
Formula and assumptions
How this calculation works.
Keep separate opening perimeters intact when cutting gasket rolls, or pool length only under your permitted joint plan. Loop = 2 × (width + height) + supplied extra; rolls follow continuous-piece packing or explicitly permitted pooling.
A worked example
Illustrative inputs only. Product properties and design dimensions are not recommendations for your project.
- Selected roll length
- 10 m
- Specified extra per perimeter loop
- 0 m
- Specified gasket joining plan
- Continuous loops required
- Measured gasket width
- 1 m
- Measured gasket height
- 2 m
- Identical openings
- 3
Gasket rolls for supplied perimeter loops: 3 rolls
Continuous-piece packing uses decreasing-length first fit. It is feasible for the stated pieces but is not guaranteed optimal. No cut kerf, damage or end trim is assumed; include these in your supplied piece lengths.
Before you purchase
Use dimensions from your plan and properties from your chosen product. Any design spacing, section or fixing pattern must already be specified.
All product dimensions, coverage, density, allowances and joining rules must come from your supplied plan or selected product. No building-code values are inserted.
Method: dimensional arithmetic and user-supplied specifications. Software checks: 2026-10-05. Calculation and review policy.