Seed and Granular Product Bag Order calculator.
Order separate seed or granular fertilizer products using their supplied label mass rate and pack mass; no product, composition or application rate is recommended.
Your inputs
Use measurements from your plan and properties from your chosen product. Any prefilled values are illustrative.
A clear estimate starts here.
Enter your dimensions and product details to see the quantity and purchase breakdown.
Formula and assumptions
How this calculation works.
Mass per product = (area − exclusions) × supplied grams per square metre / 1000 × allowance; round each product to bags.
A worked example
Illustrative inputs only. Product properties and design dimensions are not recommendations for your project.
- Your material allowance
- 0 %
- Measured product application area
- 100 m²
- Excluded area
- 0 m²
- Selected label mass rate in grams per square metre
- 30
- Selected bag mass
- 2 kg
- Measured product application area
- 50 m²
- Excluded area
- 0 m²
- Selected label mass rate in grams per square metre
- 20
- Selected bag mass
- 2 kg
Separate label-rate bag orders: 3 bags
Each row is a separate product order. Enter rate in grams per square metre regardless of area display units; no rate, seed mix, fertilizer composition or application recommendation is selected.
Before you purchase
Use dimensions from your plan and properties from your chosen product. Any design spacing, section or fixing pattern must already be specified.
Measurements, product properties and application patterns are supplied by you. Illustrative examples do not recommend construction or planting specifications.
Purchase counts round upward and whole-piece fit counts downward using exact decimal fractions. Monetary lines round half-up to cents. Transcendental measured geometry remains approximate.
Method: dimensional arithmetic and user-supplied specifications. Software checks: 2026-10-05. Calculation and review policy.