MEASURE ONCE. PLAN YOUR PURCHASE.

Tile Layout and Packs calculator.

Count a straight tile grid for each room using actual tile dimensions and specified joints.

FLOORING

Your inputs

Measurement schematic, not to scale. Use your own dimensions and product specification.

Use measurements from your plan and properties from your chosen product. Any prefilled values are illustrative.

Tile length

Where to get this value

Measure this dimension in your plan or on site and use the displayed unit. For irregular shapes, divide the geometry into the supported sections.

Tile width

Where to get this value

Measure this dimension in your plan or on site and use the displayed unit. For irregular shapes, divide the geometry into the supported sections.

Specified joint width

Where to get this value

Copy this specification from your supplied design or product documentation. This tool does not select spacing, fixing patterns or structural requirements.

Tile orientation

Tiles per pack

Where to get this value

Use the actual usable quantity or dimensions of the product you intend to buy. Check the label and the unit shown here.

Waste allowance

Shortcuts only; choose your own allowance above.

Where to get this value

Enter your own allowance. Presets are input shortcuts, not a construction recommendation.

Room 1

Length

Where to get this value

Measure this dimension in your plan or on site and use the displayed unit. For irregular shapes, divide the geometry into the supported sections.

Width

Where to get this value

Measure this dimension in your plan or on site and use the displayed unit. For irregular shapes, divide the geometry into the supported sections.

YOUR ESTIMATE

∑

A clear estimate starts here.

Enter your dimensions and product details to see the quantity and purchase breakdown.

CONTINUE YOUR PLAN

Find the next material.

Keep the quantity, then use another tool for the remaining parts of your purchase.

Explore all calculators

Formula and assumptions

BEHIND THE NUMBERS

How this calculation works.

Every grid position needs a tile; rows and columns round up before the purchase allowance. Rooms share the same selected tile and pack. Cut-off reuse is not optimised.

Tiles = Σ(ceil((L + joint)/(tile L + joint)) × ceil((W + joint)/(tile W + joint)))Calculated with normalised units

A worked example

Illustrative inputs only. Product properties and design dimensions are not recommendations for your project.

Tile length: 500 mm
Tile width: 500 mm
Specified joint width: 0 mm
Tile orientation: Length along room
Tiles per pack: 8
Waste allowance: 10 %
Length: 2 m
Width: 3 m

Tile packs to purchase: 4 packs

A narrow extra strip may require a whole row of tiles

Tile layout depends on section dimensions, tile dimensions, joint width and orientation. Pack rounding follows the estimated tile count; total area alone can conceal edge rows.

Measure separate tiled sections and use the actual tile dimensions.
Orientation and joint width are supplied choices; this tool does not prescribe an installation.
Check layout and usable cuts independently; joint estimates do not guarantee that an offcut can be reused.

What changes when one measurement changes?

Using the worked example above, change only width from 3 to 4.1m. Product specifications and all other inputs stay the same.

Tile packs to purchase: 4 → 5packs

Both results are computed by the same current calculator engine. These are illustrative dimensions, not material or design recommendations.

Combine tile quantities and your supplied coverage products Estimate a separate tile border

Calculation version and responsibility

Formula version: 1. Input schema: 1. Output schema: 1. Material data: user-supplied. Safety text: 1.

The method uses your dimensions and supplied product properties. Software tests check arithmetic examples and validation; this does not establish professional review of a design. Read the calculation policy.