Board resaw yield — blank thickness scenarios.
How does changing blank thickness affect board resaw yield when the other inputs stay fixed?
What this decision changes
This measured quantity or supplied dimension enters the method on its stated unit basis. Other inputs stay fixed so its effect can be separated from net deductions, stock constraints or purchase rounding. Method basis: Uniform resaw arithmetic only. Grain, defects, moisture movement and machine suitability are excluded.
The focus is blank thickness. All other shared inputs remain fixed for each evaluated range.
Evaluate your supplied alternatives
Start with your measured plan and selected product data. The initial values and range are illustrative. Each scenario changes only blank thickness; the other entered values stay fixed.
9 evaluated scenarios
Baseline: Source blanks — 4 blanks. Rejected combinations remain visible below.
| Blank thickness | Source blanks | Change from baseline | Use this scenario |
|---|---|---|---|
| 30 mm | 5 blanks | 1 blanks | Open in calculatorExact quantity breakdown
|
| 36.25 mm | 5 blanks | 1 blanks | Open in calculatorExact quantity breakdown
|
| 42.5 mm | 4 blanks | 0 blanks | Open in calculatorExact quantity breakdown
|
| 48.75 mm | 4 blanks | 0 blanks | Open in calculatorExact quantity breakdown
|
| 55 mm | 4 blanks | 0 blanks | Open in calculatorExact quantity breakdown
|
| 61.25 mm | 3 blanks | -1 blanks | Open in calculatorExact quantity breakdown
|
| 67.5 mm | 3 blanks | -1 blanks | Open in calculatorExact quantity breakdown
|
| 73.75 mm | 2 blanks | -2 blanks | Open in calculatorExact quantity breakdown
|
| 80 mm | 2 blanks | -2 blanks | Open in calculatorExact quantity breakdown
|
Read the evaluated results
Read calculated demand, whole purchases and exact detail lines separately. This specific input may change quantity continuously, cross a purchase step or make the stated geometry or stock fit invalid.
- Replace every illustrative baseline measurement and selected product value with the inputs for your actual task.
- Enter a comparison range on the focused input's stated unit and quantity basis.
- Review rejected combinations and use the exact detail lines to distinguish measured demand from whole purchases.
- Open an evaluated scenario in the full calculator to save its original inputs and quantity breakdown to a browser material project.
Keep the comparison within scope
Compare measurements or already specified alternatives. Quantity sensitivity does not establish material suitability or construction requirements.
Dimensions, layouts, rates and material properties are supplied by the user.
Does not select construction specifications or certify safety.
Only the listed samples are evaluated. Intermediate values, alternate constraints and global cutting optimality are not inferred from the graph.
Continue with this quantity method
Board Resaw Yield CalculatorOther independent input decisions
Prepare the actual material data
Read the measurement and purchase guides
Quantity method and illustrative scenarios checked 6 October 2026. Methods and scope.