Timber rip blanks.
Measure the complete stock width or thickness and the intended finished strip dimensions.
Read the right quantitative data
Reserved cut gap and the unusable edge allowance you supply.
Check this ordering assumption
Ignoring cut loss can add an impossible extra finished strip.
Cutting settings and safe operation are outside geometric yield.
A worked quantity method
This illustrative set of supplied inputs demonstrates Board Resaw Yield Calculator. Replace the example measurements and product figures with your own before ordering.
| Supplied input | Metric display | US display |
|---|---|---|
| Blank thickness | 50 mm | 1.97 in |
| Finished board thickness | 10 mm | 0.39 in |
| Surfacing allowance per resulting board | 2 mm | 0.08 in |
| Saw kerf | 3 mm | 0.12 in |
| Required finished boards | 10 | 10 |
Source blanks: 4 blanks
- Finished boards per blank
- 3
Your measurement and product-data sheet
Record what you know and mark verified items ready. Notes save on this browser after you edit them. Download a copy before clearing browser data.
Measure the complete stock width or thickness and the intended finished strip dimensions.
Reserved cut gap and the unusable edge allowance you supply.
Ignoring cut loss can add an impossible extra finished strip.
Input for Board Resaw Yield Calculator. Record the value with its unit and quantity basis.
Input for Board Resaw Yield Calculator. Record the value with its unit and quantity basis.
Input for Board Resaw Yield Calculator. Record the value with its unit and quantity basis.
Input for Board Resaw Yield Calculator. Record the value with its unit and quantity basis.
Input for Board Resaw Yield Calculator. Record the value with its unit and quantity basis.
Choose your next calculation
Board Resaw Yield Calculator
Count finished equal-thickness boards from a supplied blank, saw kerf and surfacing allowance.
Sheet Strip Rip Calculator
Calculate long strips ripped from sheet width after total edge trim and saw kerf.
Turn the estimate into an order
- Confirm that all quantities use the same measured basis and the selected product's current data.
- Keep different products, finishes and handed variants in separate purchase lines.
- Review exact demand and whole-pack purchase quantities before entering your quoted prices.
- Record compatible stock already on hand, then save the remaining order in your browser project.
Measurement and purchase guides
Other materials in this family
Reviewed 6 October 2026. Geometry and purchase arithmetic use your measurements and selected specifications. Calculation scope.