Sheet Strip Rip calculator.
Calculate long strips ripped from sheet width after total edge trim and saw kerf.
Your inputs
Use measurements from your plan and properties from your chosen product. Any prefilled values are illustrative.
A clear estimate starts here.
Enter your dimensions and product details to see the quantity and purchase breakdown.
Formula and assumptions
How this calculation works.
Each strip retains full sheet length. This is a one-direction ripping task; arbitrary two-dimensional nesting is excluded.
A worked example
Illustrative inputs only. Product properties and design dimensions are not recommendations for your project.
- Sheet width
- 1.2 m
- Sheet length
- 2.4 m
- Required strip width
- 0.1 m
- Total width trimmed off both edges
- 20 mm
- Saw kerf
- 3 mm
- Total strip length needed
- 30 m
Sheets for ripped strip length: 2 sheets
Before you purchase
Use dimensions from your plan and properties from your chosen product. Any design spacing, section or fixing pattern must already be specified.
Each strip retains full sheet length. This is a one-direction ripping task; arbitrary two-dimensional nesting is excluded.
Method: dimensional arithmetic and user-supplied specifications. Software checks: 2026-10-04. Calculation and review policy.