SUPPLIED LAYOUT INTERVALS

Equal drawer front grid — gap between fronts scenarios.

How does changing gap between fronts affect equal drawer front grid when the other inputs stay fixed?

What this decision changes

The chosen interval or repeat changes discrete positions, full rows or complete pattern cuts. It is different from a blanket percentage added to area. Method basis: Divide a specified cabinet face into equal drawer fronts after outer reveals and gaps between fronts. Decorative face geometry only, not drawer or hardware selection.

The focus is gap between fronts. All other shared inputs remain fixed for each evaluated range.

Equal front height = (overall height − top/bottom reveals − intervening gaps) / count.Equal Drawer Front Grid Calculator

Evaluate your supplied alternatives

Start with your measured plan and selected product data. The initial values and range are illustrative. Each scenario changes only gap between fronts; the other entered values stay fixed.

Display units

9 evaluated scenarios

Baseline: Each drawer front height — 0.23 m. Rejected combinations remain visible below.

Quantity to plot

Each bar is one actual calculated each drawer front height. Horizontal values: gap between fronts in mm.

Gap between fronts	Each drawer front height	Change from baseline	Use this scenario
12 mm	0.236 m	0.006 m	Open in calculator Exact quantity breakdown Each front width 0.58 m Total front face area 0.54752 m² This gives decorative front dimensions; drawer box travel, hardware fit and clearances need their own specifications.
14.5 mm	0.234125 m	0.004125 m	Open in calculator Exact quantity breakdown Each front width 0.58 m Total front face area 0.54317 m² This gives decorative front dimensions; drawer box travel, hardware fit and clearances need their own specifications.
17 mm	0.23225 m	0.00225 m	Open in calculator Exact quantity breakdown Each front width 0.58 m Total front face area 0.53882 m² This gives decorative front dimensions; drawer box travel, hardware fit and clearances need their own specifications.
19.5 mm	0.230375 m	0.000375 m	Open in calculator Exact quantity breakdown Each front width 0.58 m Total front face area 0.53447 m² This gives decorative front dimensions; drawer box travel, hardware fit and clearances need their own specifications.
22 mm	0.2285 m	-0.0015 m	Open in calculator Exact quantity breakdown Each front width 0.58 m Total front face area 0.53012 m² This gives decorative front dimensions; drawer box travel, hardware fit and clearances need their own specifications.
24.5 mm	0.226625 m	-0.003375 m	Open in calculator Exact quantity breakdown Each front width 0.58 m Total front face area 0.52577 m² This gives decorative front dimensions; drawer box travel, hardware fit and clearances need their own specifications.
27 mm	0.22475 m	-0.00525 m	Open in calculator Exact quantity breakdown Each front width 0.58 m Total front face area 0.52142 m² This gives decorative front dimensions; drawer box travel, hardware fit and clearances need their own specifications.
29.5 mm	0.222875 m	-0.007125 m	Open in calculator Exact quantity breakdown Each front width 0.58 m Total front face area 0.51707 m² This gives decorative front dimensions; drawer box travel, hardware fit and clearances need their own specifications.
32 mm	0.221 m	-0.009 m	Open in calculator Exact quantity breakdown Each front width 0.58 m Total front face area 0.51272 m² This gives decorative front dimensions; drawer box travel, hardware fit and clearances need their own specifications.

Read the evaluated results

Use the evaluated count steps to see when another row, column, drop or position enters the stated layout.

Replace every illustrative baseline measurement and selected product value with the inputs for your actual task.
Enter a comparison range on the focused input's stated unit and quantity basis.
Review rejected combinations and use the exact detail lines to distinguish measured demand from whole purchases.
Open an evaluated scenario in the full calculator to save its original inputs and quantity breakdown to a browser material project.

Keep the comparison within scope

Compare intervals already permitted by your plan or product. No safe spacing, structural layout or fixing requirement is chosen.

Decorative face geometry only, not drawer or hardware selection.

Dimensions, allowances, prices, properties and specifications are supplied by you. The tool computes their arithmetic consequences; it does not choose construction specifications or certify suitability.

Only the listed samples are evaluated. Intermediate values, alternate constraints and global cutting optimality are not inferred from the graph.

Continue with this quantity method

Equal Drawer Front Grid Calculator

Other independent input decisions

Read the measurement and purchase guides

Quantity method and illustrative scenarios checked 6 October 2026. Methods and scope.