Equal Drawer Front Grid calculator.
Divide a specified cabinet face into equal drawer fronts after outer reveals and gaps between fronts.
Your inputs
Use measurements from your plan and properties from your chosen product. Any prefilled values are illustrative.
A clear estimate starts here.
Enter your dimensions and product details to see the quantity and purchase breakdown.
Formula and assumptions
How this calculation works.
Divide a specified cabinet face into equal drawer fronts after outer reveals and gaps between fronts. Decorative face geometry only, not drawer or hardware selection.
A worked example
Illustrative inputs only. Product properties and design dimensions are not recommendations for your project.
- Overall face height
- 1 m
- Overall face width
- 0.6 m
- Equal drawer fronts
- 4
- Top reveal
- 10 mm
- Bottom reveal
- 10 mm
- Reveal at each outside side
- 10 mm
- Gap between fronts
- 20 mm
Each drawer front height: 0.23 m
This gives decorative front dimensions; drawer box travel, hardware fit and clearances need their own specifications.
Before you purchase
Use dimensions from your plan and properties from your chosen product. Any design spacing, section or fixing pattern must already be specified.
Decorative face geometry only, not drawer or hardware selection.
Method: dimensional arithmetic and user-supplied specifications. Software checks: 2026-10-04. Calculation and review policy.