Supplied Cabinet Door Overlay calculator.
Calculate equal door leaf dimensions from an opening and overlays or reveals already chosen in your plan.
Your inputs
Use measurements from your plan and properties from your chosen product. Any prefilled values are illustrative.
A clear estimate starts here.
Enter your dimensions and product details to see the quantity and purchase breakdown.
Formula and assumptions
How this calculation works.
Calculate equal door leaf dimensions from an opening and overlays or reveals already chosen in your plan. Signed overlay or reveal must be supplied. Does not choose hinges or verify installation.
A worked example
Illustrative inputs only. Product properties and design dimensions are not recommendations for your project.
- Opening width
- 1 m
- Opening height
- 0.8 m
- Overlay per outside side; negative for reveal
- 20 mm
- Overlay at top and bottom; negative for reveal
- 20 mm
- Equal door leaves
- 2
- Specified centre gap
- 4 mm
Door leaf width: 0.52 m
Dimensions only. Hinge compatibility, swing clearance, tolerances and mounting are not determined.
Before you purchase
Use dimensions from your plan and properties from your chosen product. Any design spacing, section or fixing pattern must already be specified.
Signed overlay or reveal must be supplied. Does not choose hinges or verify installation.
Method: dimensional arithmetic and user-supplied specifications. Software checks: 2026-10-04. Calculation and review policy.