Face Frame Cut List calculator.
Deduct continuous stile widths from the horizontal rail cut list.
Your inputs
Use measurements from your plan and properties from your chosen product. Any prefilled values are illustrative.
A clear estimate starts here.
Enter your dimensions and product details to see the quantity and purchase breakdown.
Formula and assumptions
How this calculation works.
Stiles run the complete frame height and all rails fit between them. Member sizes and joinery are supplied; no cabinet loading or joint-strength requirement is selected.
A worked example
Illustrative inputs only. Product properties and design dimensions are not recommendations for your project.
- Outside frame width
- 1 m
- Outside frame height
- 2 m
- Specified stile face width
- 0.1 m
- Specified rail face width
- 0.1 m
- Specified frame thickness
- 20 mm
- Horizontal rails per frame
- 2
- Frames
- 1
Total member cut length: 5.6 m
Before you purchase
Use dimensions from your plan and properties from your chosen product. Any design spacing, section or fixing pattern must already be specified.
Stiles run the complete frame height and all rails fit between them. Member sizes and joinery are supplied; no cabinet loading or joint-strength requirement is selected.
Dimensions, quantities, prices, timing and product properties are supplied by you. This tool does not select construction specifications or assess structural, electrical or hydraulic suitability.
Method: dimensional arithmetic and user-supplied specifications. Software checks: 2026-10-04. Calculation and review policy.