Skip to main content

MEASURED QUANTITY SENSITIVITY

Timber glue-up width — board width before supplied edge preparation scenarios.

How does changing board width before supplied edge preparation affect timber glue-up width when the other inputs stay fixed?

What this decision changes

This measured quantity or supplied dimension enters the method on its stated unit basis. Other inputs stay fixed so its effect can be separated from net deductions, stock constraints or purchase rounding. Method basis: Per-board edge removal and final outside panel trim are separate losses. Thickness is supplied as the intended finished dimension, not a machining recommendation.

The focus is board width before supplied edge preparation. All other shared inputs remain fixed for each evaluated range.

Boards = ceil((finished width+panel trim)/(board width−edge removal))Timber Glue-Up Width Calculator

Evaluate your supplied alternatives

Start with your measured plan and selected product data. The initial values and range are illustrative. Each scenario changes only board width before supplied edge preparation; the other entered values stay fixed.

Display units

Measured plan and product inputs

Specified finished panel width

m

Where to get this value

Measure this dimension in your plan or on site and use the displayed unit. For irregular shapes, divide the geometry into the supported sections.

Board width before supplied edge preparation

m

Where to get this value

Measure this dimension in your plan or on site and use the displayed unit. For irregular shapes, divide the geometry into the supported sections.

Total width removed per board

m

Total outer panel width trimmed

m

Panel length

m

Where to get this value

Measure this dimension in your plan or on site and use the displayed unit. For irregular shapes, divide the geometry into the supported sections.

Specified finished thickness

mm

Where to get this value

Measure this dimension in your plan or on site and use the displayed unit. For irregular shapes, divide the geometry into the supported sections.

Supplied comparison range for board width before supplied edge preparation

Lower supplied comparison value

m

Where to get this value

Measure this dimension in your plan or on site and use the displayed unit. For irregular shapes, divide the geometry into the supported sections.

Upper supplied comparison value

m

Where to get this value

Measure this dimension in your plan or on site and use the displayed unit. For irregular shapes, divide the geometry into the supported sections.

Nine evenly spaced values are evaluated. Whole counts are rounded to distinct integer scenarios. Values between the listed samples are not calculated.

9 evaluated scenarios

Baseline: Whole source boards across panel — 6 . Rejected combinations remain visible below.

Quantity to plot

Each bar is one actual calculated whole source boards across panel. Horizontal values: board width before supplied edge preparation in m.

Board width before supplied edge preparation	Whole source boards across panel	Change from baseline	Use this scenario
0.126 m	9	3	Open in calculator Exact quantity breakdown Assembled blank width 1.044 m Width beyond finished size 0.044 m Finished panel volume 0.04 m³ All boards have the entered usable width. Joinery, adhesives, grain movement and structural suitability are outside the model.
0.15225 m	8	2	Open in calculator Exact quantity breakdown Assembled blank width 1.138 m Width beyond finished size 0.138 m Finished panel volume 0.04 m³ All boards have the entered usable width. Joinery, adhesives, grain movement and structural suitability are outside the model.
0.1785 m	7	1	Open in calculator Exact quantity breakdown Assembled blank width 1.1795 m Width beyond finished size 0.1795 m Finished panel volume 0.04 m³ All boards have the entered usable width. Joinery, adhesives, grain movement and structural suitability are outside the model.
0.20475 m	6	0	Open in calculator Exact quantity breakdown Assembled blank width 1.1685 m Width beyond finished size 0.1685 m Finished panel volume 0.04 m³ All boards have the entered usable width. Joinery, adhesives, grain movement and structural suitability are outside the model.
0.231 m	5	-1	Open in calculator Exact quantity breakdown Assembled blank width 1.105 m Width beyond finished size 0.105 m Finished panel volume 0.04 m³ All boards have the entered usable width. Joinery, adhesives, grain movement and structural suitability are outside the model.
0.25725 m	5	-1	Open in calculator Exact quantity breakdown Assembled blank width 1.23625 m Width beyond finished size 0.23625 m Finished panel volume 0.04 m³ All boards have the entered usable width. Joinery, adhesives, grain movement and structural suitability are outside the model.
0.2835 m	4	-2	Open in calculator Exact quantity breakdown Assembled blank width 1.094 m Width beyond finished size 0.094 m Finished panel volume 0.04 m³ All boards have the entered usable width. Joinery, adhesives, grain movement and structural suitability are outside the model.
0.30975 m	4	-2	Open in calculator Exact quantity breakdown Assembled blank width 1.199 m Width beyond finished size 0.199 m Finished panel volume 0.04 m³ All boards have the entered usable width. Joinery, adhesives, grain movement and structural suitability are outside the model.
0.336 m	4	-2	Open in calculator Exact quantity breakdown Assembled blank width 1.304 m Width beyond finished size 0.304 m Finished panel volume 0.04 m³ All boards have the entered usable width. Joinery, adhesives, grain movement and structural suitability are outside the model.

Read the evaluated results

Read calculated demand, whole purchases and exact detail lines separately. This specific input may change quantity continuously, cross a purchase step or make the stated geometry or stock fit invalid.

Replace every illustrative baseline measurement and selected product value with the inputs for your actual task.
Enter a comparison range on the focused input's stated unit and quantity basis.
Review rejected combinations and use the exact detail lines to distinguish measured demand from whole purchases.
Open an evaluated scenario in the full calculator to save its original inputs and quantity breakdown to a browser material project.

Keep the comparison within scope

Compare measurements or already specified alternatives. Quantity sensitivity does not establish material suitability or construction requirements.

Per-board edge removal and final outside panel trim are separate losses. Thickness is supplied as the intended finished dimension, not a machining recommendation.

Dimensions, quantities, prices, timing and product properties are supplied by you. This tool does not select construction specifications or assess structural, electrical or hydraulic suitability.

Only the listed samples are evaluated. Intermediate values, alternate constraints and global cutting optimality are not inferred from the graph.

Continue with this quantity method

Timber Glue-Up Width Calculator

Other independent input decisions

Prepare the actual material data

Read the measurement and purchase guides

Separate per-board preparation from final panel trim

Quantity method and illustrative scenarios checked 6 October 2026. Methods and scope.