DEDUCTIONS AND EXISTING STOCK

Window reveal coating quantity — identical openings scenarios.

How does changing identical openings affect window reveal coating quantity when the other inputs stay fixed?

What this decision changes

A known internal space, existing stock or shared quantity must enter the correct subtraction or eligibility step rather than being counted as new material. Method basis: Measure the jamb, head and optionally sill returns separately from wall faces and convert them to coating containers. Reveal area = Σ(2 × opening height + opening width + optional sill width) × reveal depth × count.

The focus is identical openings in the first repeated measured entry. Other repeated entries keep their own supplied values.

Reveal area = Σ(2 × opening height + opening width + optional sill width) × reveal depth × count.Window Reveal Coating Quantity Calculator

Evaluate your supplied alternatives

Start with your measured plan and selected product data. The initial values and range are illustrative. Each scenario changes only identical openings in the first repeated entry; the other entered values stay fixed.

Display units

Measured plan and product inputs

Included measured surfaces

Specified coats

Chosen product coverage

m²/L

Where to get this value

Use the usable coverage or mixed yield printed on your product label for the stated application. Do not substitute bag weight for finished volume.

Selected container liquid volume

Your additional material allowance

Where to get this value

Enter your own allowance. Presets are input shortcuts, not a construction recommendation.

Opening reveal 1 · entry varied by the range

Opening width

Where to get this value

Measure this dimension in your plan or on site and use the displayed unit. For irregular shapes, divide the geometry into the supported sections.

Opening height

Where to get this value

Measure this dimension in your plan or on site and use the displayed unit. For irregular shapes, divide the geometry into the supported sections.

Measured reveal depth

Where to get this value

Measure this dimension in your plan or on site and use the displayed unit. For irregular shapes, divide the geometry into the supported sections.

Identical openings

Supplied comparison range for identical openings

Lower supplied comparison value

Upper supplied comparison value

Nine evenly spaced values are evaluated. Whole counts are rounded to distinct integer scenarios. Values between the listed samples are not calculated.

8 evaluated scenarios

Baseline: Reveal coating containers — 2 containers. Rejected combinations remain visible below.

Quantity to plot

Each bar is one actual calculated reveal coating containers. Horizontal values: identical openings in the supplied count basis. Only the first repeated entry varies.

Identical openings	Reveal coating containers	Change from baseline	Use this scenario
2	1 container	-1 container	Open in calculator Exact quantity breakdown Measured reveal area 2.4 m² Liquid required with allowance 0.48 L Counts two jambs and a head for each opening, with an optional sill. Wall faces, frames and glazing are excluded.
3	1 container	-1 container	Open in calculator Exact quantity breakdown Measured reveal area 3.6 m² Liquid required with allowance 0.72 L Counts two jambs and a head for each opening, with an optional sill. Wall faces, frames and glazing are excluded.
4	1 container	-1 container	Open in calculator Exact quantity breakdown Measured reveal area 4.8 m² Liquid required with allowance 0.96 L Counts two jambs and a head for each opening, with an optional sill. Wall faces, frames and glazing are excluded.
5	2 containers	0 containers	Open in calculator Exact quantity breakdown Measured reveal area 6 m² Liquid required with allowance 1.2 L Counts two jambs and a head for each opening, with an optional sill. Wall faces, frames and glazing are excluded.
6	2 containers	0 containers	Open in calculator Exact quantity breakdown Measured reveal area 7.2 m² Liquid required with allowance 1.44 L Counts two jambs and a head for each opening, with an optional sill. Wall faces, frames and glazing are excluded.
7	2 containers	0 containers	Open in calculator Exact quantity breakdown Measured reveal area 8.4 m² Liquid required with allowance 1.68 L Counts two jambs and a head for each opening, with an optional sill. Wall faces, frames and glazing are excluded.
8	2 containers	0 containers	Open in calculator Exact quantity breakdown Measured reveal area 9.6 m² Liquid required with allowance 1.92 L Counts two jambs and a head for each opening, with an optional sill. Wall faces, frames and glazing are excluded.
9	3 containers	1 container	Open in calculator Exact quantity breakdown Measured reveal area 10.8 m² Liquid required with allowance 2.16 L Counts two jambs and a head for each opening, with an optional sill. Wall faces, frames and glazing are excluded.

Read the evaluated results

Watch the net requirement and actual order separately. Invalid rows identify combinations that cannot satisfy the method's geometric or stock-basis constraints.

Replace every illustrative baseline measurement and selected product value with the inputs for your actual task.
Enter a comparison range on the focused input's stated unit and quantity basis.
Review rejected combinations and use the exact detail lines to distinguish measured demand from whole purchases.
Open an evaluated scenario in the full calculator to save its original inputs and quantity breakdown to a browser material project.

Keep the comparison within scope

The supplied cavity, exclusion or stock eligibility must already be valid; the result does not select a safe shell, opening or construction detail.

Counts the arithmetic consequences of supplied specifications. Does not select construction systems, structural properties, fastening schedules, safe handling limits or code compliance.

Only the listed samples are evaluated. Intermediate values, alternate constraints and global cutting optimality are not inferred from the graph.

Continue with this quantity method

Window Reveal Coating Quantity Calculator

Other independent input decisions

Prepare the actual material data

Read the measurement and purchase guides

Quantity method and illustrative scenarios checked 6 October 2026. Methods and scope.