Angled End Cut Blank calculator.
Translate a supplied short edge and two end angles into long-edge cut blanks.
Your inputs
Use measurements from your plan and properties from your chosen product. Any prefilled values are illustrative.
A clear estimate starts here.
Enter your dimensions and product details to see the quantity and purchase breakdown.
Formula and assumptions
How this calculation works.
Uses independently specified end deviations from square. Opposite-facing or compound cuts require a different drawing; this model is a two-dimensional length calculation.
A worked example
Illustrative inputs only. Product properties and design dimensions are not recommendations for your project.
- Specified short-edge length
- 1 m
- Width between long and short edges
- 0.1 m
- First end deviation from a square cut
- 45 °
- Second end deviation from a square cut
- 45 °
- Identical pieces
- 2
Outside long-edge blank length: 1.2 m
Both end cuts are assumed to extend the same outside edge. Machine settings, clamping and cutting procedures are not specified.
Before you purchase
Use dimensions from your plan and properties from your chosen product. Any design spacing, section or fixing pattern must already be specified.
Uses independently specified end deviations from square. Opposite-facing or compound cuts require a different drawing; this model is a two-dimensional length calculation.
Dimensions, quantities, prices, timing and product properties are supplied by you. This tool does not select construction specifications or assess structural, electrical or hydraulic suitability.
Method: dimensional arithmetic and user-supplied specifications. Software checks: 2026-10-04. Calculation and review policy.