Rotated Tile Grid Takeoff calculator.
Clip a rotated tile grid to the actual floor boundary and count edge cuts.
Your inputs
Use measurements from your plan and properties from your chosen product. Any prefilled values are illustrative.
A clear estimate starts here.
Enter your dimensions and product details to see the quantity and purchase breakdown.
Formula and assumptions
How this calculation works.
Tiles are rotated as a full specified grid, then clipped against the measured rectangle. A tile that only touches an edge uses no area and is excluded. It is a takeoff, not a recommended tile angle.
A worked example
Illustrative inputs only. Product properties and design dimensions are not recommendations for your project.
- Floor width
- 2 m
- Floor length
- 2 m
- Tile width
- 1 m
- Tile length
- 1 m
- Specified joint width
- 0 mm
- Supplied grid rotation
- 45 °
- Grid origin offset across local tile direction
- 0 m
- Grid origin offset along local tile direction
- 0 m
- Tiles per pack
- 4
Whole tile packs without cut reuse: 3
Each intersecting position uses one source tile. Offcut sharing, laying tolerances and pattern optimisation are not assumed; rotation and origin come from your selected layout.
Before you purchase
Use dimensions from your plan and properties from your chosen product. Any design spacing, section or fixing pattern must already be specified.
Tiles are rotated as a full specified grid, then clipped against the measured rectangle. A tile that only touches an edge uses no area and is excluded. It is a takeoff, not a recommended tile angle.
Dimensions, quantities, prices, timing and product properties are supplied by you. This tool does not select construction specifications or assess structural, electrical or hydraulic suitability.
Method: dimensional arithmetic and user-supplied specifications. Software checks: 2026-10-04. Calculation and review policy.