Specified Paired Veneer Leaf Bundle calculator.
Order even-numbered leaf groups for each face using a supplied paired layout, preserving whole leaf length and supplier bundles.
Your inputs
Use measurements from your plan and properties from your chosen product. Any prefilled values are illustrative.
A clear estimate starts here.
Enter your dimensions and product details to see the quantity and purchase breakdown.
Formula and assumptions
How this calculation works.
Leaves per face = 2 × ceil(ceil(face width / leaf width)/2); each face must fit within a whole supplied leaf length. Does not guarantee grain matching, colour consistency, veneer suitability or pressing method.
A worked example
Illustrative inputs only. Product properties and design dimensions are not recommendations for your project.
- Usable supplied leaf width
- 0.2 m
- Usable supplied leaf length
- 1 m
- Leaves per matching supplier bundle
- 4
- Measured face width
- 0.5 m
- Measured face height
- 0.8 m
- Identical faces
- 2
Paired veneer leaf bundles: 2 bundles
Assumes the supplier can provide the requested paired sequence. Edge trimming, seams and adhesive requirements remain separate.
Before you purchase
Use dimensions from your plan and properties from your chosen product. Any design spacing, section or fixing pattern must already be specified.
Does not guarantee grain matching, colour consistency, veneer suitability or pressing method.
All dimensions, properties and application patterns are user-supplied. No building-code default is inserted.
Method: dimensional arithmetic and user-supplied specifications. Software checks: 2026-10-06. Calculation and review policy.