Centred Cabinet Handle Hole Coordinate calculator.
Locate two supplied horizontal handle holes on the centre of a measured front and count repeated hole pairs.
Your inputs
Use measurements from your plan and properties from your chosen product. Any prefilled values are illustrative.
A clear estimate starts here.
Enter your dimensions and product details to see the quantity and purchase breakdown.
Formula and assumptions
How this calculation works.
Horizontal hole positions = front width/2 ± supplied hole-centre spacing/2; vertical position = supplied offset from top. Does not choose a handle, door construction, screw length or a suitable fixing location.
A worked example
Illustrative inputs only. Product properties and design dimensions are not recommendations for your project.
- Measured front width
- 0.6 m
- Measured front height
- 0.2 m
- Supplied handle hole centre spacing
- 128 mm
- Supplied vertical hole offset from top
- 0.1 m
- Identical fronts
- 3
Supplied handle holes: 6 holes
Positions are relative to the measured front edges. Hole diameter, pilot depth and suitability of this location are not chosen.
Before you purchase
Use dimensions from your plan and properties from your chosen product. Any design spacing, section or fixing pattern must already be specified.
Does not choose a handle, door construction, screw length or a suitable fixing location.
All dimensions, properties and application patterns are user-supplied. No building-code default is inserted.
Method: dimensional arithmetic and user-supplied specifications. Software checks: 2026-10-06. Calculation and review policy.