Panel Edge Banding Cut Order calculator.
Count selected panel edges and apply trim allowance to each cut, not each panel.
Your inputs
Use measurements from your plan and properties from your chosen product. Any prefilled values are illustrative.
A clear estimate starts here.
Enter your dimensions and product details to see the quantity and purchase breakdown.
Formula and assumptions
How this calculation works.
Each rectangle can have zero, one or two selected edges in each direction. End trim is repeated for every cut; excluded edges receive no banding.
A worked example
Illustrative inputs only. Product properties and design dimensions are not recommendations for your project.
- Usable banding roll length
- 5 m
- Extra length per individual edge cut
- 0.1 m
- Panel length
- 2 m
- Panel width
- 1 m
- Selected long edges
- 2
- Selected short edges
- 1
- Panel count
- 1
Whole banding rolls: 2
Pools compatible banding length only. A separate cut allocation is needed to prove that all individual cuts fit the rolls without extra stock.
Before you purchase
Use dimensions from your plan and properties from your chosen product. Any design spacing, section or fixing pattern must already be specified.
Each rectangle can have zero, one or two selected edges in each direction. End trim is repeated for every cut; excluded edges receive no banding.
Dimensions, quantities, prices, timing and product properties are supplied by you. This tool does not select construction specifications or assess structural, electrical or hydraulic suitability.
Method: dimensional arithmetic and user-supplied specifications. Software checks: 2026-10-04. Calculation and review policy.