MetandumFREE TOOLS. NO SUBSCRIPTION.Find a calculator ⌕My projects
All comparisons

Equal outer ellipse dimensions with different inner openings.

Identical outside dimensions do not imply equal coated frame area. A smaller opening retains more face area and can change whole-container rounding.

Calculate two independent purchase scenarios

Prefilled values are illustrative. Replace measurements and product data on both sides. Quantities with different units or different products cannot be combined. Open a result in its calculator to save it to your material project.

1.6 metre inner ellipse width

Concentric Elliptical Frame Coating Quantity Calculator

Where to get this value

Use the usable coverage or mixed yield printed on your product label for the stated application. Do not substitute bag weight for finished volume.

Measured item 1
Where to get this value

Measure this dimension in your plan or on site and use the displayed unit. For irregular shapes, divide the geometry into the supported sections.

Where to get this value

Measure this dimension in your plan or on site and use the displayed unit. For irregular shapes, divide the geometry into the supported sections.

Where to get this value

Measure this dimension in your plan or on site and use the displayed unit. For irregular shapes, divide the geometry into the supported sections.

Where to get this value

Measure this dimension in your plan or on site and use the displayed unit. For irregular shapes, divide the geometry into the supported sections.

0.8 metre inner ellipse width

Concentric Elliptical Frame Coating Quantity Calculator

Where to get this value

Use the usable coverage or mixed yield printed on your product label for the stated application. Do not substitute bag weight for finished volume.

Measured item 1
Where to get this value

Measure this dimension in your plan or on site and use the displayed unit. For irregular shapes, divide the geometry into the supported sections.

Where to get this value

Measure this dimension in your plan or on site and use the displayed unit. For irregular shapes, divide the geometry into the supported sections.

Where to get this value

Measure this dimension in your plan or on site and use the displayed unit. For irregular shapes, divide the geometry into the supported sections.

Where to get this value

Measure this dimension in your plan or on site and use the displayed unit. For irregular shapes, divide the geometry into the supported sections.

A worked purchase comparison

For a 2 × 1 m outer ellipse, a concentric 1.6 × 0.6 m opening leaves approximately 0.817 m² face area. A 0.8 × 0.3 m opening leaves approximately 1.382 m². At an illustrative supplied coverage of 1 m²/L for one coat, 0.5 L containers require two and three containers respectively.

Use your measurements and selected products

Use chosen product coverage, supplied coat count and actual container volume. Shape, border size and appropriate finish are not chosen by these tools.

Concentric Elliptical Frame Coating Quantity Calculator

Keep the visible face of a supplied elliptical frame separate from its central opening before ordering coating.

Regular Polygon Inset Frame Coating Calculator

Measure a uniformly inset face border of a supplied regular polygon using its apothem and existing border width.

Alternating Radius Star Face Coating Calculator

Measure a supplied simple star face with evenly alternating outer and inner radii before calculating coating containers.

Capsule Shaped Inset Border Coating Calculator

Deduct a concentric inset capsule from an outer capsule face while retaining the straight section and curved ends.

Rounded Rectangle Inset Frame Coating Calculator

Measure a supplied rounded rectangle face border with a matching inset radius rather than subtracting unrelated rectangle areas.

Annular Arc Face Band Coating Calculator

Measure only a supplied curved annular face band, excluding separate radial or straight border strips.

What makes the comparison valid?

Only the explicitly measured face is coated in this model. Coat count and coverage are supplied, not recommendations. Star faces have non-crossing alternating-radius boundaries; irregular or self-crossing boundaries require another model.

Illustrative quantities above are not market prices or construction recommendations. Compare actual permitted scenarios independently and keep alternative orders separate.

Next steps

Reviewed 5 October 2026. Search demand has not been measured.