MetandumFREE TOOLS. NO SUBSCRIPTION.Find a calculator My projects
MEASUREMENTS AND PURCHASE DECISIONS

Order paver types from a complete pattern module.

Publication and review

Author
Metandum Team

14 years of experience in digital web projects.

Reviewer
Metandum Team

14 years of experience in digital web projects.

Published
Last reviewed
Last updated

Start With a Complete Pattern Module

When a paved area uses more than one paver size, work out the order from the repeating pattern rather than estimating each size separately. A pattern module is one complete repeat of the design. It has a fixed area and a fixed count of each paver type. Ordering complete modules keeps those counts together and helps you avoid losing the intended proportions while scaling the pattern to the project.

Before entering figures, make sure the module represents the exact pattern you plan to use. Count each paver type in one complete repeat, and record the area that repeat covers. The area and counts must describe the same module. If the pattern changes, update the counts and area together; figures from one layout cannot reliably describe another.

Turn Paved Area Into Module Count

Use the Paver Pattern Module Calculator for the planned paved area, the area covered by one complete pattern module, and any extra complete modules you want to include. Enter the calculator’s field labels and units as shown: “Paved area” in m², “Area covered by one complete pattern module” in m², and “Extra complete modules” in %. The result is a whole number of complete pattern modules, so the design remains in complete repeats.

In this example, the “Paved area” is 28 m², each “complete pattern module” covers 0.96 m², and “Extra complete modules” is 6%. The calculator returns 31 complete pattern modules. That is the published worked example: its interpretation is that the planned area and allowance are converted into a whole-module order. Treat the result as a module count tied to this pattern, not as a general estimate for another layout or scope.

Keep Each Paver Count Attached

A module count alone does not tell a supplier how many of each type to prepare. Multiply the number of complete modules by the count for each paver type in one module. Keep the type labels and counts linked to the pattern so that a count does not get assigned to the wrong size. The calculator shows the example module contains 4 units of one paver type and 2 units of another. With 31 modules, that produces 124 units of the first type and 62 units of the second.

Counts in the published 31-module example
Paver type in one moduleUnits per moduleModulesUnits to order
Paver type 1431124
Paver type 223162

Confirm the Paved Scope Before Ordering

The calculator uses the paved area you enter. Decide what that area includes before relying on the module result. A border may use a different arrangement or paver type from the field pattern. If you include it in the area but its counts do not match the repeating module, the result will not describe the border correctly. You may need to calculate the main field and border as separate parts, each with its own complete module and component counts.

Cuts and edge conditions also affect the purchase. Some units may need trimming where the pattern meets a boundary, and the final layout can change the quantities needed at those edges. The module calculation preserves the repeating field pattern; it does not determine a cut plan or state how many usable pieces a particular set of cuts will produce. Review the perimeter, openings, and transitions on the layout, then decide how those parts should be included in the order. Keep that decision tied to the actual plan rather than changing the module counts informally.

Translate Counts Into Supplier Paperwork

The result is a count of individual units by paver type. Suppliers may record or sell those units in case quantities, so confirm the relevant case size and how each type is listed before submitting paperwork. Convert the calculated unit counts according to the supplier’s ordering rules, and show the resulting quantities alongside the calculated counts. Case rounding can change the final quantities on the order; it does not change the calculator’s module result or establish a new nominal paved area.

Keep the sequence visible on your worksheet or order request: the pattern’s counts per module, the complete module count, the calculated units per type, and the supplier’s final case quantities. This makes it easier to check that the order still follows the chosen pattern after the supplier’s packaging rules are applied. Do not replace the unit counts with a guessed area equivalent, since package sizes and the module’s nominal coverage are separate pieces of information.

Check the Order Against the Layout

Before placing an order, compare the pattern used for the calculation with the drawing or setting-out plan. Confirm that the area entered represents the same paved scope, that one module’s area and component counts match the selected layout, and that the extra-module percentage is deliberate. Then check that each type’s calculated unit count has been carried into the supplier’s case quantities correctly.

If the design uses a different module near a border, a separate paved section, or a changed pattern, calculate that scope using its own matching inputs instead of folding unlike parts into one repeat. Keep the resulting counts distinct in your order notes. This gives you a clear path from the layout to the quantity for each paver type, while leaving boundary decisions and supplier packaging visible for review.

Handle Rounding in the Final Order

A whole-module result may leave a small difference between the entered paved area and the area represented by the ordered repeats. That is a consequence of ordering complete modules. In the example, the calculation ends at 31 modules; keep that result and its 124-unit and 62-unit component counts together when you review the order. Do not adjust one component in isolation, because that would change the pattern represented by the order.

If the supplier’s case quantities require further rounding, record that adjustment as a separate ordering step. This preserves the distinction between the calculator’s complete pattern modules and the supplier’s final case quantities. It also gives you a practical review point: confirm the full set of quantities against the layout, the stated border and cut scope, and the supplier’s case rules before sending the paperwork.

Questions about this guide

What if my paved area does not divide evenly into modules?

Use the calculator’s whole-number complete-module result and review the resulting coverage against your layout. Keep the returned count and all per-type counts together; they describe complete repeats of the selected pattern.

Should a border be included in the Paved area?

Include it only if the entered area and module counts represent that border’s pattern. If the border uses a different arrangement or paver type, account for it separately with matching module information.

How should I treat cuts at edges?

Review the perimeter and transitions on the actual plan. The module result gives repeating-pattern quantities, while the cut plan may affect what you need to purchase at boundaries.

What if the supplier sells pavers by cases?

Check the case size and ordering rules for each type, then convert the calculated unit counts into supplier quantities. Record case rounding separately from the module result.

Use the matching calculator

Updated . Reviewed . Methods and scope.

Related decisions

Connected work guides and comparisons

Browse all work types

Collect your material inputs

Browse material preparation sheets

Evaluate your own supplied alternatives

Browse quantity scenarios