Short versus long stock for the same pipe cuts: quantity checks.
Publication and review
- Author
- Metandum Team
14 years of experience in digital web projects.
- Reviewer
- Metandum Team
14 years of experience in digital web projects.
- Published
- Last reviewed
- Last updated
Choose Stock by Cut Fit
For the published worked example, the 4.31 m stock option gives the smaller order: 2 bundles, compared with 4 bundles of 3.31 m stock. This guide covers purchasing quantities for four continuous 2.48 m cuts and three continuous 1.68 m cuts, with 0.016 m reserved for each cut. These are hypothetical inputs. The comparison concerns cutting and bundle rounding only; it does not provide an installation design.
The key decision is whether each required run fits within a whole stock length after its allowance is included, and whether different runs can share that length. A total of the required meters alone cannot answer that question. Each cut must come from one continuous piece. The shorter option leaves every 2.48 m run on its own stock length, while the longer option can pair each 2.48 m run with a 1.68 m run.
Record Runs and Allowance
Start with a cut list that separates measured length from quantity. Here, four identical runs measure 2.48 m each, and three identical runs measure 1.68 m each. The counts refer to separate finished pieces, not stock lengths or bundles. Keeping the two sizes in separate rows makes it easier to check that all seven continuous runs are included when planning the purchase.
The example reserves an extra 0.016 m per cut. For this arithmetic, that allowance is added to each measured run: each longer cut uses 2.496 m of stock, and each shorter cut uses 1.696 m. Across seven cuts, the reserved cut length is 15.072 m. That sum is useful for checking inputs, but it does not determine how many stock lengths are needed, because pieces cannot be joined to make a continuous run.
Enter the Published Inputs
In the Pipe Cut List and Bundle Order Calculator, enter Selected stock length as either 3.31 m or 4.31 m for the comparison. Enter Your extra length reserved per cut as 0.016 m, and Stock lengths per supplier bundle as 2. These field labels and units match the published cases. Keeping the allowance and bundle size fixed lets you compare the two stock lengths without changing the other inputs.
Enter two rows in the cut list. Set Measured length to 2.48 m and Identical runs to 4 in the first row; set Measured length to 1.68 m and Identical runs to 3 in the second. The Measured length values are the desired run lengths before the reserved extra is applied. Identical runs counts how many pieces of that same measured length are needed. Check those counts against the physical cut list before reading the bundle result.
Check the Shorter Stock
With Selected stock length set to 3.31 m, neither two 2.48 m runs nor one 2.48 m run plus one 1.68 m run fit after the allowance. The first pairing would need 4.992 m; the mixed pairing would need 4.192 m. Two shorter runs would need 3.392 m, also more than 3.31 m. Each of these comparisons includes the 0.016 m allowance on both cuts being considered.
A feasible arrangement is one 2.496 m longer cut on each of four stock lengths, then one 1.696 m shorter cut on each of three more. That uses seven whole stock lengths. Since each supplier bundle contains two stock lengths, the order rounds up to four bundles, providing eight lengths. One length remains beyond the seven assigned lengths. The published worked example reports 7 whole stock lengths and 4 Pipe stock bundles for this option.
Check the Longer Stock
With Selected stock length set to 4.31 m, one longer cut and one shorter cut can share a stock length: 2.496 m plus 1.696 m equals 4.192 m. That leaves 0.118 m of stock length in this arithmetic. The pairing is feasible because the sum of the two allowances is already included. The remaining 0.118 m is simply leftover length; it does not create another complete required run.
Round Lengths Into Bundles
Bundle rounding happens after assigning all required cuts to whole stock lengths. For the 3.31 m option, seven lengths divided into groups of two require four bundles, because a partial bundle cannot be ordered as half a supplier bundle in this example. For the 4.31 m option, four lengths make two complete bundles. The number of bundles is therefore a purchasing quantity derived from the whole-length count and the stated two-length bundle size.
Do not treat the 15.072 m reserved cut length as a stock order total that can be divided by either stock length and rounded once. That approach ignores whether the cuts fit together and can undercount stock. Nor should the 0.118 m remainder from a mixed 4.31 m stock cut be added to a remainder from another length to claim another continuous cut. Separate leftover pieces cannot be joined into one unbroken run.
Interpret This Purchase Comparison
The published worked example gives a clear comparison: 3.31 m stock requires 7 whole stock lengths and rounds to 4 bundles, while 4.31 m stock requires 4 whole stock lengths and 2 bundles. The 4.31 m option uses fewer stock lengths because three mixed pairs fit, not because the required runs or reserved cut length changed. Read the figures together with the demonstrated feasible arrangements to understand what drives the result.
Bundle count is the final answer in the units promised by the title, but it does not express total price or the amount of usable leftover material. No price is supplied, so this comparison cannot identify a lower-cost order. It also does not establish product characteristics beyond the entered stock lengths and stated bundle quantity. If a supplier uses a different number of stock lengths per bundle, the bundle rounding must be recalculated using that bundle size.
Confirm Before You Purchase
Before placing an order, verify that the seven measured runs and the 0.016 m allowance per cut match the cutting plan you intend to use. Confirm Selected stock length and Stock lengths per supplier bundle against the supplier’s available order unit. A change to any input can change the stock-length assignment or the number of bundles. In particular, check whether the bundle quantity is still two lengths when you compare a different listed stock length.
Questions about this guide
Why does 3.31 m stock need seven lengths when the reserved cut length is 15.072 m?
The total length does not show which cuts fit together. At 3.31 m, no two allowance-inclusive cuts in this cut list fit on one length, so the four 2.496 m cuts and three 1.696 m cuts each need their own stock length.
Why does the 4.31 m plan use four lengths?
Three lengths each hold one 2.496 m cut plus one 1.696 m cut, totaling 4.192 m per pair. The remaining 2.496 m cut uses a fourth length.
Can leftover pieces from separate stock lengths be joined to make a required run?
No. The cut list requires each run to be continuous, so leftover pieces cannot be combined to create another unbroken 2.48 m or 1.68 m cut.
What happens if a supplier bundle contains a different number of lengths?
Keep the whole stock length count from a valid cutting arrangement, then round that count up to complete bundles using the supplier’s actual Stock lengths per supplier bundle value.
Use the matching calculator
Updated . Reviewed . Methods and scope.