Continuous pipe stock.
Read each required cut and the fitting takeout or socket insertion already supplied.
Read the right quantitative data
Usable stock length, pieces per bundle and reserved cut allowance.
Check this ordering assumption
A centreline distance between fitting references may not equal the finished pipe cut.
No service diameter, pressure rating or joining system is selected.
A worked quantity method
This illustrative set of supplied inputs demonstrates Pipe Cut List and Bundle Order Calculator. Replace the example measurements and product figures with your own before ordering.
| Supplied input | Metric display | US display |
|---|---|---|
| Selected stock length | 6 m | 19.69 ft |
| Your extra length reserved per cut | 0 m | 0 ft |
| Stock lengths per supplier bundle | 1 | 1 |
| Separate supplied run 1: Measured length | 4 m | 13.12 ft |
| Separate supplied run 1: Identical runs | 3 | 3 |
Pipe stock bundles: 3 bundles
- Whole stock lengths
- 3
- Reserved cut length
- 12 m
Continuous cuts use decreasing-length first-fit packing. This is a feasible count, not a guarantee of the minimum. Any per-cut extra is explicitly reserved by you.
Open this example in the full calculatorYour measurement and product-data sheet
Record what you know and mark verified items ready. Notes save on this browser after you edit them. Download a copy before clearing browser data.
Read each required cut and the fitting takeout or socket insertion already supplied.
Usable stock length, pieces per bundle and reserved cut allowance.
A centreline distance between fitting references may not equal the finished pipe cut.
Input for Pipe Cut List and Bundle Order Calculator. Record the value with its unit and quantity basis.
Input for Pipe Cut List and Bundle Order Calculator. Record the value with its unit and quantity basis.
Input for Pipe Cut List and Bundle Order Calculator. Record the value with its unit and quantity basis.
Input for Pipe Cut List and Bundle Order Calculator. Record the value with its unit and quantity basis.
Input for Pipe Cut List and Bundle Order Calculator. Record the value with its unit and quantity basis.
Choose your next calculation
Pipe Cut List and Bundle Order Calculator
Pack a supplied list of continuous pipe cuts into stock lengths and round those lengths to supplier bundles.
Pipe Cuts from Supplied Socket and Takeout Dimensions Calculator
Derive each cut from measured fitting reference distances, supplied takeouts and inserted ends before ordering continuous stock.
Turn the estimate into an order
- Confirm that all quantities use the same measured basis and the selected product's current data.
- Keep different products, finishes and handed variants in separate purchase lines.
- Review exact demand and whole-pack purchase quantities before entering your quoted prices.
- Record compatible stock already on hand, then save the remaining order in your browser project.
Measurement and purchase guides
Other materials in this family
Reviewed 6 October 2026. Geometry and purchase arithmetic use your measurements and selected specifications. Calculation scope.