MetandumFREE TOOLS. NO SUBSCRIPTION.Find a calculator My projects
MEASUREMENTS AND PURCHASE DECISIONS

How to measure and order: tablecloth, pillow and cushion cut orders.

Publication and review

Author
Metandum Team

14 years of experience in digital web projects.

Reviewer
Metandum Team

14 years of experience in digital web projects.

Published
Last reviewed
Last updated

A soft-goods cut order starts with the finished item and ends with cuttable stock dimensions.

Choose the calculator by blank shape; each model treats allowances and stock differently.

Name the finished item and its datum

Before entering dimensions, identify whether the job is a tablecloth, envelope pillow, tapered cushion, zipper, or piping cord. Write down the finished surface dimensions and the point from which each is measured. A tablecloth drop extends beyond the top edge; a hem allowance is extra material beyond the finished drop. An envelope cover also needs an overlap between back panels, while a shaped seat blank needs its front width, back width, depth, and thickness. Linear components such as zipper tape and piping use cut lengths rather than sheet area. Keep finished dimensions separate from blank dimensions so allowances are not repeated by mistake. Mark each reference clearly on the cut worksheet.

Choose a model by the cut geometry

A circular tablecloth blank is a square envelope around the finished circle; a rectangular cloth blank adds drop and hem allowance on both sides and ends. The circular and rectangular roll-blank calculators use those respective geometries and test how many panels fit a supplied stock sheet. The envelope-pillow calculator creates one front and two overlapping back panels. A tapered seat-foam model uses the larger of front and back widths for the cut blank and reports net trapezoid area and volume. Zipper and piping calculators instead estimate continuous stock rolls from supplied cuts and end extras. These tools answer different questions, so an area total from one model cannot replace a cut-layout result from another. Select the shape first, then make sure each input label describes the actual material and dimension you measured.

Source: Circular tablecloth blank calculator

Separate finished size from allowances

For a round or rectangular cloth, drop is measured from the tabletop edge down the side, while hem extension is additional material at the edge for finishing. A calculator may add drop on both sides of a blank and hem beyond it; entering a finished drop as though it were a blank dimension understates the cut. Record whether a number describes the tabletop, the visible drape, or extra fabric for sewing. For pillow panels, the selected hem and overlap inputs add to front and back blanks; they are not interchangeable with the finished insert dimensions. For a cushion, foam thickness affects volume but does not increase the face outline automatically. Follow the formula printed with the chosen tool and compare its terms with the cut sketch. If an allowance is already included in a supplier’s finished size, do not add it again.

Check a circular tablecloth order

Suppose two round tops each measure 0.8 m across, the requested side drop is 0.1 m, and the hem extension is 0.05 m. The calculator’s blank-side formula adds the top diameter, two drops, and two hem extensions, giving a 1.1 m square blank for each cloth. On supplied stock 1.5 m wide by 3 m long, the example fits two panels in one sheet. The result reports two cut panels, 2.42 m² net panel area, and 2.08 m² outside the panels including cutting gaps. Those are stock-layout outputs, not proof that a printed motif matches or that the cloth’s grain permits the rotation. Enter actual usable stock dimensions and the supplier’s kerf or rotation setting before using the sheet count to order.

Source: Circular tablecloth blank calculator

Treat pillow backs as separate panels

An envelope pillow cover is not cut as one full back panel. The front uses the finished width and height with its entered hem; the two back pieces each use a portion of the height plus the specified overlap and hems. Check that the overlap is a design choice for the selected insert and closure, rather than a default the calculator should recommend. In the supplied example, a 0.4 m square front, 0.05 m hem, 0.2 m overlap, and 1 m square sheet produce three panels on one sheet. The engine reports 0.65 m² net panel area and 0.35 m² outside panels and cutting gaps. The result is for this rectangular panel arrangement only; it does not add a zipper, lining, print matching, or a closure. List those parts separately if the finished cover needs them.

Source: Envelope pillow fabric panel calculator

Keep shaped foam dimensions distinct

Measure front and back widths, depth, and selected thickness. Blank width uses the larger edge; trapezoid foam area is the average of the parallel widths times depth, then volume multiplies by thickness. Four seats at 0.6 m front, 0.4 m back, and 0.5 m depth total 1.0 m² of foam. In the engine example, four rectangular 0.6-by-0.5 m blanks occupy 1.2 m² of source stock and fit one 1-by-2 m sheet; at 0.05 m thickness, foam volume is 0.05 m³. The layout uses entered orientation and neither shapes edges nor selects density. Keep cover dimensions and allowances separate from foam core measurements.

Source: Tapered seat foam blank calculator

Order continuous trim as a separate stock

Zipper tape and piping cord are linear components, so total their individual cut lengths and any end extras before rounding to full stock rolls. The zipper model adds the supplied extra to each opening length, then checks the cuts against stock roll length. Its example uses three 0.8 m cuts, 0.2 m total end extra per cut, and 2 m stock, resulting in two rolls. The piping model uses the rounded cushion perimeter formula and a supplied tail extra; it does not infer cord size, seam allowance, or how the cover is sewn. Keep these trim outputs separate from sheet counts for fabric or foam. A single large surface-area total cannot reveal whether narrow trim pieces fit on the remaining sheet edges or whether each continuous component is available in the needed length.

Source: Cushion zipper continuous stock calculator

Reconcile cut pieces with sold stock

Before ordering, compare the tool’s stock-sheet or roll count with the seller’s actual unit. Check usable width, stock length, kerf, orientation permission, minimum order, and whether the supplier sells continuous lengths or fixed packages. A result of one sheet is not the same as buying one square meter, and the outside-panel area is not automatically recoverable waste. If the grain, nap, directional print, or pattern repeat restricts rotation, change the layout inputs or prepare a separate manual cut plan. Keep one row for each fabric, lining, foam grade, zipper, and cord so their quantities do not merge. The calculators can make supplied measurements consistent and show the rounding behind a count; they cannot verify fabric properties, cutting quality, fit, or the maker’s construction method. Confirm those specifications on the selected material sheet before release.

Questions about this guide

How does the foam example distinguish cut stock from net shape?

Four tapered seat shapes have 1.0 m² total net trapezoid area and 0.05 m³ foam volume. Their larger rectangular blanks occupy 1.2 m² of stock; that blank area is not the net trapezoid area.

How many panels fit the tablecloth stock example?

Two 0.8 m tops with a 0.1 m drop and 0.05 m hem each need 1.1 m square blanks. The 1.5 m by 3 m stock fits both panels in one sheet.

How many zipper rolls does the example require?

Three 0.8 m cuts with 0.2 m end extra each total 3 m. With 2 m stock rolls, the calculator rounds the requirement to two rolls.

What does the envelope-pillow example count?

One 0.4 m square front with 0.05 m hem and 0.2 m overlap produces three cut panels on the 1 m square sheet. Its 0.65 m² net panel area includes the front and overlapping back pieces.

Use the matching calculator

Updated . Reviewed . Methods and scope.

Related decisions

Connected work guides and comparisons

Browse all work types

Collect your material inputs

Browse material preparation sheets

Evaluate your own supplied alternatives

Browse quantity scenarios