Cushion zipper stock.
List the supplied full zipper run for every cover.
Read the right quantitative data
Continuous roll length and the chosen end allowance.
Check this ordering assumption
Total zipper metres do not prove an individual complete run fits the roll.
Sliders, stops and compatibility must be separately scheduled.
A worked quantity method
This illustrative set of supplied inputs demonstrates Cushion Zipper Continuous Stock Roll Calculator. Replace the example measurements and product figures with your own before ordering.
| Supplied input | Metric display | US display |
|---|---|---|
| Selected stock length | 2 m | 6.56 ft |
| Your extra length reserved per cut | 0 m | 0 ft |
| Supplied total end extension per opening | 0.2 m | 0.66 ft |
| Supplied cushion opening 1: Specified zipper opening length | 0.8 m | 2.62 ft |
| Supplied cushion opening 1: Identical openings | 3 | 3 |
Continuous zipper stock rolls: 2 rolls
- Supplied zipper cuts
- 3
Continuous cuts use decreasing-length first-fit packing. This is a feasible count, not a guarantee of the minimum. Any per-cut extra is explicitly reserved by you. Sliders and end stops are separate items.
Open this example in the full calculatorYour measurement and product-data sheet
Record what you know and mark verified items ready. Notes save on this browser after you edit them. Download a copy before clearing browser data.
List the supplied full zipper run for every cover.
Continuous roll length and the chosen end allowance.
Total zipper metres do not prove an individual complete run fits the roll.
Input for Cushion Zipper Continuous Stock Roll Calculator. Record the value with its unit and quantity basis.
Input for Cushion Zipper Continuous Stock Roll Calculator. Record the value with its unit and quantity basis.
Input for Cushion Zipper Continuous Stock Roll Calculator. Record the value with its unit and quantity basis.
Input for Cushion Zipper Continuous Stock Roll Calculator. Record the value with its unit and quantity basis.
Input for Cushion Zipper Continuous Stock Roll Calculator. Record the value with its unit and quantity basis.
Choose your next calculation
Cushion Zipper Continuous Stock Roll Calculator
Order continuous zipper stock from supplied cushion openings and end extras without joining shorter remnants.
Stock Cut List Calculator
Group required straight cuts into available equal-length stock, allowing for kerf and end trimming.
Turn the estimate into an order
- Confirm that all quantities use the same measured basis and the selected product's current data.
- Keep different products, finishes and handed variants in separate purchase lines.
- Review exact demand and whole-pack purchase quantities before entering your quoted prices.
- Record compatible stock already on hand, then save the remaining order in your browser project.
Measurement and purchase guides
- How to measure and order: tablecloth, pillow and cushion cut orders
- Narrow versus wide stock for whole circular tablecloth blanks: quantity checks
- Apply banding cut allowance to every selected edge
- A reproducible two-stock cut plan can still cost more than another plan
- Keep first-emitter offset in a specified dripline takeoff
- Purchased stock length is not installed finished length
Other materials in this family
Reviewed 6 October 2026. Geometry and purchase arithmetic use your measurements and selected specifications. Calculation scope.