Tapered pot casting material.
Measure the outer taper and the prescribed internal cavity starting above the base.
Read the right quantitative data
Prepared yield per complete selected package.
Check this ordering assumption
Subtracting a cavity that starts at the wrong height changes the side-wall volume.
The supplied cavity must fit the outer taper; wall adequacy is not assessed.
A worked quantity method
This illustrative set of supplied inputs demonstrates Tapered Round Pot Casting Shell Material Calculator. Replace the example measurements and product figures with your own before ordering.
| Supplied input | Metric display | US display |
|---|---|---|
| Selected mixed volume yield per kit or bag | 10 L/bag | 0.353 ft³/bag |
| Supplied tapered pot 1: Outer bottom diameter | 0.4 m | 1.31 ft |
| Supplied tapered pot 1: Outer top diameter | 0.4 m | 1.31 ft |
| Supplied tapered pot 1: Outer height | 0.3 m | 0.98 ft |
| Supplied tapered pot 1: Inner diameter at cavity base | 0.3 m | 0.98 ft |
| Supplied tapered pot 1: Inner diameter at cavity top | 0.3 m | 0.98 ft |
| Supplied tapered pot 1: Supplied base height | 0.05 m | 0.16 ft |
| Supplied tapered pot 1: Identical castings | 1 | 1 |
Selected mixed-material packages: 3 packages
- Mixed material volume
- 20.03 L
Straight-sided centred circular frusta with the same top plane. Endpoint checks retain containment throughout the linear taper. Product suitability, curing, strength and mixing specifications are not selected.
Open this example in the full calculatorYour measurement and product-data sheet
Record what you know and mark verified items ready. Notes save on this browser after you edit them. Download a copy before clearing browser data.
Measure the outer taper and the prescribed internal cavity starting above the base.
Prepared yield per complete selected package.
Subtracting a cavity that starts at the wrong height changes the side-wall volume.
Input for Tapered Round Pot Casting Shell Material Calculator. Record the value with its unit and quantity basis.
Input for Tapered Round Pot Casting Shell Material Calculator. Record the value with its unit and quantity basis.
Input for Tapered Round Pot Casting Shell Material Calculator. Record the value with its unit and quantity basis.
Input for Tapered Round Pot Casting Shell Material Calculator. Record the value with its unit and quantity basis.
Input for Tapered Round Pot Casting Shell Material Calculator. Record the value with its unit and quantity basis.
Input for Tapered Round Pot Casting Shell Material Calculator. Record the value with its unit and quantity basis.
Input for Tapered Round Pot Casting Shell Material Calculator. Record the value with its unit and quantity basis.
Input for Tapered Round Pot Casting Shell Material Calculator. Record the value with its unit and quantity basis.
Choose your next calculation
Tapered Round Pot Casting Shell Material Calculator
Subtract a supplied tapered inner cavity from the outer pot, checking that the cavity fits at the supplied base height.
Frustum Volume Calculator
Find the volume of a tapered round container with two flat ends.
Turn the estimate into an order
- Confirm that all quantities use the same measured basis and the selected product's current data.
- Keep different products, finishes and handed variants in separate purchase lines.
- Review exact demand and whole-pack purchase quantities before entering your quoted prices.
- Record compatible stock already on hand, then save the remaining order in your browser project.
Measurement and purchase guides
Other materials in this family
Reviewed 6 October 2026. Geometry and purchase arithmetic use your measurements and selected specifications. Calculation scope.