DEDUCTIONS AND EXISTING STOCK

Tapered round pot casting shell material — base height scenarios.

How does changing base height affect tapered round pot casting shell material when the other inputs stay fixed?

What this decision changes

A known internal space, existing stock or shared quantity must enter the correct subtraction or eligibility step rather than being counted as new material. Method basis: Shell volume = outer circular frustum volume − inner circular frustum volume; the inner cavity starts at the supplied base height. Does not choose shell thickness, material, reinforcement, load capacity or planter suitability.

The focus is supplied base height in the first repeated measured entry. Other repeated entries keep their own supplied values.

Shell volume = outer circular frustum volume − inner circular frustum volume; the inner cavity starts at the supplied base height.Tapered Round Pot Casting Shell Material Calculator

Evaluate your supplied alternatives

Start with your measured plan and selected product data. The initial values and range are illustrative. Each scenario changes only supplied base height in the first repeated entry; the other entered values stay fixed.

Display units

Measured plan and product inputs

Selected mixed volume yield per kit or bag

L/bag

Where to get this value

Use the usable coverage or mixed yield printed on your product label for the stated application. Do not substitute bag weight for finished volume.

Supplied tapered pot 1 · entry varied by the range

Outer bottom diameter

Outer top diameter

Outer height

Where to get this value

Measure this dimension in your plan or on site and use the displayed unit. For irregular shapes, divide the geometry into the supported sections.

Inner diameter at cavity base

Inner diameter at cavity top

Supplied base height

Identical castings

Supplied comparison range for supplied base height

Lower supplied comparison value

Upper supplied comparison value

Nine evenly spaced values are evaluated. Whole counts are rounded to distinct integer scenarios. Values between the listed samples are not calculated.

9 evaluated scenarios

Baseline: Selected mixed-material packages — 3 packages. Rejected combinations remain visible below.

Quantity to plot

Each bar is one actual calculated selected mixed-material packages. Horizontal values: supplied base height in m. Only the first repeated entry varies.

Supplied base height	Selected mixed-material packages	Change from baseline	Use this scenario
0.03 m	2 packages	-1 packages	Open in calculator Exact quantity breakdown Mixed material volume 18.61394 L Straight-sided centred circular frusta with the same top plane. Endpoint checks retain containment throughout the linear taper. Product suitability, curing, strength and mixing specifications are not selected.
0.03625 m	2 packages	-1 packages	Open in calculator Exact quantity breakdown Mixed material volume 19.05572 L Straight-sided centred circular frusta with the same top plane. Endpoint checks retain containment throughout the linear taper. Product suitability, curing, strength and mixing specifications are not selected.
0.0425 m	2 packages	-1 packages	Open in calculator Exact quantity breakdown Mixed material volume 19.49751 L Straight-sided centred circular frusta with the same top plane. Endpoint checks retain containment throughout the linear taper. Product suitability, curing, strength and mixing specifications are not selected.
0.04875 m	2 packages	-1 packages	Open in calculator Exact quantity breakdown Mixed material volume 19.9393 L Straight-sided centred circular frusta with the same top plane. Endpoint checks retain containment throughout the linear taper. Product suitability, curing, strength and mixing specifications are not selected.
0.055 m	3 packages	0 packages	Open in calculator Exact quantity breakdown Mixed material volume 20.38108 L Straight-sided centred circular frusta with the same top plane. Endpoint checks retain containment throughout the linear taper. Product suitability, curing, strength and mixing specifications are not selected.
0.06125 m	3 packages	0 packages	Open in calculator Exact quantity breakdown Mixed material volume 20.82287 L Straight-sided centred circular frusta with the same top plane. Endpoint checks retain containment throughout the linear taper. Product suitability, curing, strength and mixing specifications are not selected.
0.0675 m	3 packages	0 packages	Open in calculator Exact quantity breakdown Mixed material volume 21.26466 L Straight-sided centred circular frusta with the same top plane. Endpoint checks retain containment throughout the linear taper. Product suitability, curing, strength and mixing specifications are not selected.
0.07375 m	3 packages	0 packages	Open in calculator Exact quantity breakdown Mixed material volume 21.70644 L Straight-sided centred circular frusta with the same top plane. Endpoint checks retain containment throughout the linear taper. Product suitability, curing, strength and mixing specifications are not selected.
0.08 m	3 packages	0 packages	Open in calculator Exact quantity breakdown Mixed material volume 22.14823 L Straight-sided centred circular frusta with the same top plane. Endpoint checks retain containment throughout the linear taper. Product suitability, curing, strength and mixing specifications are not selected.

Read the evaluated results

Watch the net requirement and actual order separately. Invalid rows identify combinations that cannot satisfy the method's geometric or stock-basis constraints.

Replace every illustrative baseline measurement and selected product value with the inputs for your actual task.
Enter a comparison range on the focused input's stated unit and quantity basis.
Review rejected combinations and use the exact detail lines to distinguish measured demand from whole purchases.
Open an evaluated scenario in the full calculator to save its original inputs and quantity breakdown to a browser material project.

Keep the comparison within scope

The supplied cavity, exclusion or stock eligibility must already be valid; the result does not select a safe shell, opening or construction detail.

Does not choose shell thickness, material, reinforcement, load capacity or planter suitability.

Only the listed samples are evaluated. Intermediate values, alternate constraints and global cutting optimality are not inferred from the graph.

Continue with this quantity method

Tapered Round Pot Casting Shell Material Calculator

Other independent input decisions

Prepare the actual material data

Read the measurement and purchase guides

Quantity method and illustrative scenarios checked 6 October 2026. Methods and scope.