Recessed disk casting material.
Measure the full disk and its prescribed face recess depth and diameter.
Read the right quantitative data
Prepared yield per package.
Check this ordering assumption
A face recess is a partial-depth deduction, not a hole through the whole disk.
The supplied recess must stay within the face and disk depth.
A worked quantity method
This illustrative set of supplied inputs demonstrates Round Cast Disk Face Recess Material Calculator. Replace the example measurements and product figures with your own before ordering.
| Supplied input | Metric display | US display |
|---|---|---|
| Selected mixed volume yield per kit or bag | 1 L/bag | 0.035 ft³/bag |
| Supplied recessed disk 1: Outer disk diameter | 0.2 m | 0.66 ft |
| Supplied recessed disk 1: Supplied disk thickness | 30 mm | 1.18 in |
| Supplied recessed disk 1: Supplied centred recess diameter | 0.1 m | 0.33 ft |
| Supplied recessed disk 1: Supplied recess depth | 10 mm | 0.39 in |
| Supplied recessed disk 1: Identical disks | 1 | 1 |
Selected mixed-material packages: 1 packages
- Mixed material volume
- 0.86 L
One cylindrical face recess only; side grooves, bevels and embedded pieces are not inferred. Product suitability, curing, strength and mixing specifications are not selected.
Open this example in the full calculatorYour measurement and product-data sheet
Record what you know and mark verified items ready. Notes save on this browser after you edit them. Download a copy before clearing browser data.
Measure the full disk and its prescribed face recess depth and diameter.
Prepared yield per package.
A face recess is a partial-depth deduction, not a hole through the whole disk.
Input for Round Cast Disk Face Recess Material Calculator. Record the value with its unit and quantity basis.
Input for Round Cast Disk Face Recess Material Calculator. Record the value with its unit and quantity basis.
Input for Round Cast Disk Face Recess Material Calculator. Record the value with its unit and quantity basis.
Input for Round Cast Disk Face Recess Material Calculator. Record the value with its unit and quantity basis.
Input for Round Cast Disk Face Recess Material Calculator. Record the value with its unit and quantity basis.
Input for Round Cast Disk Face Recess Material Calculator. Record the value with its unit and quantity basis.
Choose your next calculation
Round Cast Disk Face Recess Material Calculator
Subtract a supplied centred circular face recess from a cast disk and convert retained volume to mixed material packages.
Cylinder Volume Calculator
Find the geometric capacity of a straight round container.
Turn the estimate into an order
- Confirm that all quantities use the same measured basis and the selected product's current data.
- Keep different products, finishes and handed variants in separate purchase lines.
- Review exact demand and whole-pack purchase quantities before entering your quoted prices.
- Record compatible stock already on hand, then save the remaining order in your browser project.
Measurement and purchase guides
Other materials in this family
Reviewed 6 October 2026. Geometry and purchase arithmetic use your measurements and selected specifications. Calculation scope.