PREPARED YIELD

Round cast disk face recess material — mixed volume yield per kit or bag scenarios.

How does changing mixed volume yield per kit or bag affect round cast disk face recess material when the other inputs stay fixed?

What this decision changes

Prepared yield divides the measured demand before whole packages are rounded. Dry package mass and prepared volume must remain separate. Method basis: Retained volume = π(outer diameter² × disk thickness − recess diameter² × recess depth)/4. Does not choose a recess, thickness, material or structural use for the casting.

The focus is selected mixed volume yield per kit or bag. All other shared inputs remain fixed for each evaluated range.

Retained volume = π(outer diameter² × disk thickness − recess diameter² × recess depth)/4.Round Cast Disk Face Recess Material Calculator

Evaluate your supplied alternatives

Start with your measured plan and selected product data. The initial values and range are illustrative. Each scenario changes only selected mixed volume yield per kit or bag; the other entered values stay fixed.

Display units

Measured plan and product inputs

Selected mixed volume yield per kit or bag

L/bag

Where to get this value

Use the usable coverage or mixed yield printed on your product label for the stated application. Do not substitute bag weight for finished volume.

Supplied recessed disk 1

Outer disk diameter

Where to get this value

Measure this dimension in your plan or on site and use the displayed unit. For irregular shapes, divide the geometry into the supported sections.

Supplied disk thickness

Where to get this value

Measure this dimension in your plan or on site and use the displayed unit. For irregular shapes, divide the geometry into the supported sections.

Supplied centred recess diameter

Supplied recess depth

Where to get this value

Measure this dimension in your plan or on site and use the displayed unit. For irregular shapes, divide the geometry into the supported sections.

Identical disks

Supplied comparison range for selected mixed volume yield per kit or bag

Lower supplied comparison value

L/bag

Where to get this value

Use the usable coverage or mixed yield printed on your product label for the stated application. Do not substitute bag weight for finished volume.

Upper supplied comparison value

L/bag

Where to get this value

Use the usable coverage or mixed yield printed on your product label for the stated application. Do not substitute bag weight for finished volume.

Nine evenly spaced values are evaluated. Whole counts are rounded to distinct integer scenarios. Values between the listed samples are not calculated.

9 evaluated scenarios

Baseline: Selected mixed-material packages — 1 packages. Rejected combinations remain visible below.

Quantity to plot

Each bar is one actual calculated selected mixed-material packages. Horizontal values: selected mixed volume yield per kit or bag in L/bag.

Selected mixed volume yield per kit or bag	Selected mixed-material packages	Change from baseline	Use this scenario
0.6 L/bag	2 packages	1 packages	Open in calculator Exact quantity breakdown Mixed material volume 0.863938 L One cylindrical face recess only; side grooves, bevels and embedded pieces are not inferred. Product suitability, curing, strength and mixing specifications are not selected.
0.725 L/bag	2 packages	1 packages	Open in calculator Exact quantity breakdown Mixed material volume 0.863938 L One cylindrical face recess only; side grooves, bevels and embedded pieces are not inferred. Product suitability, curing, strength and mixing specifications are not selected.
0.85 L/bag	2 packages	1 packages	Open in calculator Exact quantity breakdown Mixed material volume 0.863938 L One cylindrical face recess only; side grooves, bevels and embedded pieces are not inferred. Product suitability, curing, strength and mixing specifications are not selected.
0.975 L/bag	1 packages	0 packages	Open in calculator Exact quantity breakdown Mixed material volume 0.863938 L One cylindrical face recess only; side grooves, bevels and embedded pieces are not inferred. Product suitability, curing, strength and mixing specifications are not selected.
1.1 L/bag	1 packages	0 packages	Open in calculator Exact quantity breakdown Mixed material volume 0.863938 L One cylindrical face recess only; side grooves, bevels and embedded pieces are not inferred. Product suitability, curing, strength and mixing specifications are not selected.
1.225 L/bag	1 packages	0 packages	Open in calculator Exact quantity breakdown Mixed material volume 0.863938 L One cylindrical face recess only; side grooves, bevels and embedded pieces are not inferred. Product suitability, curing, strength and mixing specifications are not selected.
1.35 L/bag	1 packages	0 packages	Open in calculator Exact quantity breakdown Mixed material volume 0.863938 L One cylindrical face recess only; side grooves, bevels and embedded pieces are not inferred. Product suitability, curing, strength and mixing specifications are not selected.
1.475 L/bag	1 packages	0 packages	Open in calculator Exact quantity breakdown Mixed material volume 0.863938 L One cylindrical face recess only; side grooves, bevels and embedded pieces are not inferred. Product suitability, curing, strength and mixing specifications are not selected.
1.6 L/bag	1 packages	0 packages	Open in calculator Exact quantity breakdown Mixed material volume 0.863938 L One cylindrical face recess only; side grooves, bevels and embedded pieces are not inferred. Product suitability, curing, strength and mixing specifications are not selected.

Read the evaluated results

Compare the whole purchase count with the unrounded material lines. A higher supplied yield may change leftovers before it changes the whole-package count.

Replace every illustrative baseline measurement and selected product value with the inputs for your actual task.
Enter a comparison range on the focused input's stated unit and quantity basis.
Review rejected combinations and use the exact detail lines to distinguish measured demand from whole purchases.
Open an evaluated scenario in the full calculator to save its original inputs and quantity breakdown to a browser material project.

Keep the comparison within scope

Use alternative yields only when they come from the selected products and the same preparation basis.

Does not choose a recess, thickness, material or structural use for the casting.

Only the listed samples are evaluated. Intermediate values, alternate constraints and global cutting optimality are not inferred from the graph.

Continue with this quantity method

Round Cast Disk Face Recess Material Calculator

Other independent input decisions

Prepare the actual material data

Read the measurement and purchase guides

Quantity method and illustrative scenarios checked 6 October 2026. Methods and scope.