Skip to main content

DEDUCTIONS AND EXISTING STOCK

Round cast disk face recess material — recess depth scenarios.

How does changing recess depth affect round cast disk face recess material when the other inputs stay fixed?

What this decision changes

A known internal space, existing stock or shared quantity must enter the correct subtraction or eligibility step rather than being counted as new material. Method basis: Retained volume = π(outer diameter² × disk thickness − recess diameter² × recess depth)/4. Does not choose a recess, thickness, material or structural use for the casting.

The focus is supplied recess depth in the first repeated measured entry. Other repeated entries keep their own supplied values.

Retained volume = π(outer diameter² × disk thickness − recess diameter² × recess depth)/4.Round Cast Disk Face Recess Material Calculator

Evaluate your supplied alternatives

Start with your measured plan and selected product data. The initial values and range are illustrative. Each scenario changes only supplied recess depth in the first repeated entry; the other entered values stay fixed.

Display units

Measured plan and product inputs

Selected mixed volume yield per kit or bag

L/bag

Where to get this value

Use the usable coverage or mixed yield printed on your product label for the stated application. Do not substitute bag weight for finished volume.

Supplied recessed disk 1 · entry varied by the range

Outer disk diameter

m

Where to get this value

Measure this dimension in your plan or on site and use the displayed unit. For irregular shapes, divide the geometry into the supported sections.

Supplied disk thickness

mm

Where to get this value

Measure this dimension in your plan or on site and use the displayed unit. For irregular shapes, divide the geometry into the supported sections.

Supplied centred recess diameter

m

Supplied recess depth

mm

Where to get this value

Measure this dimension in your plan or on site and use the displayed unit. For irregular shapes, divide the geometry into the supported sections.

Identical disks

Supplied comparison range for supplied recess depth

Lower supplied comparison value

mm

Where to get this value

Measure this dimension in your plan or on site and use the displayed unit. For irregular shapes, divide the geometry into the supported sections.

Upper supplied comparison value

mm

Where to get this value

Measure this dimension in your plan or on site and use the displayed unit. For irregular shapes, divide the geometry into the supported sections.

Nine evenly spaced values are evaluated. Whole counts are rounded to distinct integer scenarios. Values between the listed samples are not calculated.

9 evaluated scenarios

Baseline: Selected mixed-material packages — 1 packages. Rejected combinations remain visible below.

Quantity to plot

Each bar is one actual calculated mixed material volume. Horizontal values: supplied recess depth in mm. Only the first repeated entry varies.

Supplied recess depth	Mixed material volume	Change from baseline	Purchase result	Use this scenario
6 mm	0.8953539 L	0.03141593 L	1 packages	Open in calculator Exact quantity breakdown Mixed material volume 0.8953539 L One cylindrical face recess only; side grooves, bevels and embedded pieces are not inferred. Product suitability, curing, strength and mixing specifications are not selected.
7.25 mm	0.8855364 L	0.02159845 L	1 packages	Open in calculator Exact quantity breakdown Mixed material volume 0.8855364 L One cylindrical face recess only; side grooves, bevels and embedded pieces are not inferred. Product suitability, curing, strength and mixing specifications are not selected.
8.5 mm	0.875719 L	0.01178097 L	1 packages	Open in calculator Exact quantity breakdown Mixed material volume 0.875719 L One cylindrical face recess only; side grooves, bevels and embedded pieces are not inferred. Product suitability, curing, strength and mixing specifications are not selected.
9.75 mm	0.8659015 L	0.001963495 L	1 packages	Open in calculator Exact quantity breakdown Mixed material volume 0.8659015 L One cylindrical face recess only; side grooves, bevels and embedded pieces are not inferred. Product suitability, curing, strength and mixing specifications are not selected.
11 mm	0.856084 L	-0.007853982 L	1 packages	Open in calculator Exact quantity breakdown Mixed material volume 0.856084 L One cylindrical face recess only; side grooves, bevels and embedded pieces are not inferred. Product suitability, curing, strength and mixing specifications are not selected.
12.25 mm	0.8462665 L	-0.01767146 L	1 packages	Open in calculator Exact quantity breakdown Mixed material volume 0.8462665 L One cylindrical face recess only; side grooves, bevels and embedded pieces are not inferred. Product suitability, curing, strength and mixing specifications are not selected.
13.5 mm	0.836449 L	-0.02748894 L	1 packages	Open in calculator Exact quantity breakdown Mixed material volume 0.836449 L One cylindrical face recess only; side grooves, bevels and embedded pieces are not inferred. Product suitability, curing, strength and mixing specifications are not selected.
14.75 mm	0.8266316 L	-0.03730641 L	1 packages	Open in calculator Exact quantity breakdown Mixed material volume 0.8266316 L One cylindrical face recess only; side grooves, bevels and embedded pieces are not inferred. Product suitability, curing, strength and mixing specifications are not selected.
16 mm	0.8168141 L	-0.04712389 L	1 packages	Open in calculator Exact quantity breakdown Mixed material volume 0.8168141 L One cylindrical face recess only; side grooves, bevels and embedded pieces are not inferred. Product suitability, curing, strength and mixing specifications are not selected.

Read the evaluated results

Watch the net requirement and actual order separately. Invalid rows identify combinations that cannot satisfy the method's geometric or stock-basis constraints.

Replace every illustrative baseline measurement and selected product value with the inputs for your actual task.
Enter a comparison range on the focused input's stated unit and quantity basis.
Review rejected combinations and use the exact detail lines to distinguish measured demand from whole purchases.
Open an evaluated scenario in the full calculator to save its original inputs and quantity breakdown to a browser material project.

Keep the comparison within scope

The supplied cavity, exclusion or stock eligibility must already be valid; the result does not select a safe shell, opening or construction detail.

Does not choose a recess, thickness, material or structural use for the casting.

Only the listed samples are evaluated. Intermediate values, alternate constraints and global cutting optimality are not inferred from the graph.

Continue with this quantity method

Round Cast Disk Face Recess Material Calculator

Other independent input decisions

Prepare the actual material data

Read the measurement and purchase guides

Quantity method and illustrative scenarios checked 6 October 2026. Methods and scope.