PRESCRIBED ITEM COUNTS

Box cushion fabric panel — matching cushions scenarios.

How does changing matching cushions affect box cushion fabric panel when the other inputs stay fixed?

What this decision changes

This supplied count describes physical items or prescribed positions. Repeated items can contribute to one pooled order only on the same compatible material basis. Method basis: Calculate rectangular top, bottom and boxing panel area with your specified seam allowances. Specified sewing pattern only; not a guarantee of comfort, upholstery suitability or fabric yield.

The focus is matching cushions. All other shared inputs remain fixed for each evaluated range.

Cut panels = 2(L+2s)(W+2s) + 2(L+2s)(D+2s) + 2(W+2s)(D+2s), per cushion.Box Cushion Fabric Panel Calculator

Evaluate your supplied alternatives

Start with your measured plan and selected product data. The initial values and range are illustrative. Each scenario changes only matching cushions; the other entered values stay fixed.

Display units

Measured plan and product inputs

Finished cushion length

Where to get this value

Measure this dimension in your plan or on site and use the displayed unit. For irregular shapes, divide the geometry into the supported sections.

Finished cushion width

Where to get this value

Measure this dimension in your plan or on site and use the displayed unit. For irregular shapes, divide the geometry into the supported sections.

Finished cushion depth

Where to get this value

Measure this dimension in your plan or on site and use the displayed unit. For irregular shapes, divide the geometry into the supported sections.

Specified allowance at each sewn edge

Matching cushions

Supplied comparison range for matching cushions

Lower supplied comparison value

Upper supplied comparison value

Nine evenly spaced values are evaluated. Whole counts are rounded to distinct integer scenarios. Values between the listed samples are not calculated.

4 evaluated scenarios

Baseline: Total rectangular cut panel area — 2.34 m². Rejected combinations remain visible below.

Quantity to plot

Each bar is one actual calculated total rectangular cut panel area. Horizontal values: matching cushions in the supplied count basis.

Matching cushions	Total rectangular cut panel area	Change from baseline	Use this scenario
1	2.34 m²	0 m²	Open in calculator Exact quantity breakdown Top and bottom panel length 1.1 m Top and bottom panel width 0.6 m Boxing panel width 0.3 m Six separate rectangular panels per cushion. Zips, piping, shrinkage, pattern alignment and roll layout are excluded.
2	4.68 m²	2.34 m²	Open in calculator Exact quantity breakdown Top and bottom panel length 1.1 m Top and bottom panel width 0.6 m Boxing panel width 0.3 m Six separate rectangular panels per cushion. Zips, piping, shrinkage, pattern alignment and roll layout are excluded.
3	7.02 m²	4.68 m²	Open in calculator Exact quantity breakdown Top and bottom panel length 1.1 m Top and bottom panel width 0.6 m Boxing panel width 0.3 m Six separate rectangular panels per cushion. Zips, piping, shrinkage, pattern alignment and roll layout are excluded.
4	9.36 m²	7.02 m²	Open in calculator Exact quantity breakdown Top and bottom panel length 1.1 m Top and bottom panel width 0.6 m Boxing panel width 0.3 m Six separate rectangular panels per cushion. Zips, piping, shrinkage, pattern alignment and roll layout are excluded.

Read the evaluated results

Compare the selected count with the total quantity and whole purchase lines. Boundary positions, kits and package rounding can make the order change in steps.

Replace every illustrative baseline measurement and selected product value with the inputs for your actual task.
Enter a comparison range on the focused input's stated unit and quantity basis.
Review rejected combinations and use the exact detail lines to distinguish measured demand from whole purchases.
Open an evaluated scenario in the full calculator to save its original inputs and quantity breakdown to a browser material project.

Keep the comparison within scope

The count and fixing or component schedule are inputs; capacity, performance and safe attachment are not determined.

Specified sewing pattern only; not a guarantee of comfort, upholstery suitability or fabric yield.

Dimensions, allowances, prices, properties and specifications are supplied by you. The tool computes their arithmetic consequences; it does not choose construction specifications or certify suitability.

Only the listed samples are evaluated. Intermediate values, alternate constraints and global cutting optimality are not inferred from the graph.

Continue with this quantity method

Box Cushion Fabric Panel Calculator

Other independent input decisions

Prepare the actual material data

Read the measurement and purchase guides

Add seam allowance to both dimensions of each cushion panel

Quantity method and illustrative scenarios checked 6 October 2026. Methods and scope.