STOCK FIT

Measured exclusion board piece yield — measured board length scenarios.

How does changing measured board length affect measured exclusion board piece yield when the other inputs stay fixed?

What this decision changes

Full required pieces must fit usable stock. Aggregate area or length alone cannot prove a feasible cut or roll allocation. Method basis: Count equal pieces that fit the usable intervals of one board after measured excluded zones and per-piece cut loss. Only user-marked exclusions; no automatic defect identification or strength judgement.

The focus is measured board length. All other shared inputs remain fixed for each evaluated range.

Merge excluded intervals; sum floor(remaining interval length / (piece length + reserved per-piece kerf)).Measured Exclusion Board Piece Yield Calculator

Evaluate your supplied alternatives

Start with your measured plan and selected product data. The initial values and range are illustrative. Each scenario changes only measured board length; the other entered values stay fixed.

Display units

Measured plan and product inputs

Measured board length

Where to get this value

Use the actual usable quantity or dimensions of the product you intend to buy. Check the label and the unit shown here.

Finished equal piece length

Cut loss reserved per piece

Entries 1

Excluded zone start

Excluded zone end

Supplied comparison range for measured board length

Lower supplied comparison value

Where to get this value

Use the actual usable quantity or dimensions of the product you intend to buy. Check the label and the unit shown here.

Upper supplied comparison value

Where to get this value

Use the actual usable quantity or dimensions of the product you intend to buy. Check the label and the unit shown here.

Nine evenly spaced values are evaluated. Whole counts are rounded to distinct integer scenarios. Values between the listed samples are not calculated.

9 evaluated scenarios

Baseline: Equal pieces outside supplied exclusions — 4 pieces. Rejected combinations remain visible below.

Quantity to plot

Each bar is one actual calculated equal pieces outside supplied exclusions. Horizontal values: measured board length in m.

Measured board length	Equal pieces outside supplied exclusions	Change from baseline	Use this scenario
3 m	2 pieces	-2 pieces	Open in calculator Exact quantity breakdown Total available interval length 2 m Excluded union length 1 m Reserves one kerf per piece. Exclusion boundaries must already include their separation cuts and trimming. Does not identify defects or certify material quality.
3.625 m	2 pieces	-2 pieces	Open in calculator Exact quantity breakdown Total available interval length 2.625 m Excluded union length 1 m Reserves one kerf per piece. Exclusion boundaries must already include their separation cuts and trimming. Does not identify defects or certify material quality.
4.25 m	3 pieces	-1 piece	Open in calculator Exact quantity breakdown Total available interval length 3.25 m Excluded union length 1 m Reserves one kerf per piece. Exclusion boundaries must already include their separation cuts and trimming. Does not identify defects or certify material quality.
4.875 m	3 pieces	-1 piece	Open in calculator Exact quantity breakdown Total available interval length 3.875 m Excluded union length 1 m Reserves one kerf per piece. Exclusion boundaries must already include their separation cuts and trimming. Does not identify defects or certify material quality.
5.5 m	4 pieces	0 pieces	Open in calculator Exact quantity breakdown Total available interval length 4.5 m Excluded union length 1 m Reserves one kerf per piece. Exclusion boundaries must already include their separation cuts and trimming. Does not identify defects or certify material quality.
6.125 m	5 pieces	1 piece	Open in calculator Exact quantity breakdown Total available interval length 5.125 m Excluded union length 1 m Reserves one kerf per piece. Exclusion boundaries must already include their separation cuts and trimming. Does not identify defects or certify material quality.
6.75 m	5 pieces	1 piece	Open in calculator Exact quantity breakdown Total available interval length 5.75 m Excluded union length 1 m Reserves one kerf per piece. Exclusion boundaries must already include their separation cuts and trimming. Does not identify defects or certify material quality.
7.375 m	6 pieces	2 pieces	Open in calculator Exact quantity breakdown Total available interval length 6.375 m Excluded union length 1 m Reserves one kerf per piece. Exclusion boundaries must already include their separation cuts and trimming. Does not identify defects or certify material quality.
8 m	7 pieces	3 pieces	Open in calculator Exact quantity breakdown Total available interval length 7 m Excluded union length 1 m Reserves one kerf per piece. Exclusion boundaries must already include their separation cuts and trimming. Does not identify defects or certify material quality.

Read the evaluated results

Look for jumps in purchased stock and rejected fits. The rows show actual evaluated allocations, not an assumption that every intermediate size will behave identically.

Replace every illustrative baseline measurement and selected product value with the inputs for your actual task.
Enter a comparison range on the focused input's stated unit and quantity basis.
Review rejected combinations and use the exact detail lines to distinguish measured demand from whole purchases.
Open an evaluated scenario in the full calculator to save its original inputs and quantity breakdown to a browser material project.

Keep the comparison within scope

Permitted orientation, complete-run requirements and reserved cut losses remain supplied inputs; sampled layouts do not promise a globally optimal cut plan.

Only user-marked exclusions; no automatic defect identification or strength judgement.

Dimensions, allowances, prices, properties and specifications are supplied by you. The tool computes their arithmetic consequences; it does not choose construction specifications or certify suitability.

Only the listed samples are evaluated. Intermediate values, alternate constraints and global cutting optimality are not inferred from the graph.

Continue with this quantity method

Measured Exclusion Board Piece Yield Calculator

Other independent input decisions

Read the measurement and purchase guides

Keep measured unusable board zones separate from end trimming

Quantity method and illustrative scenarios checked 6 October 2026. Methods and scope.