Measured Exclusion Board Piece Yield calculator.
Count equal pieces that fit the usable intervals of one board after measured excluded zones and per-piece cut loss.
Your inputs
Use measurements from your plan and properties from your chosen product. Any prefilled values are illustrative.
A clear estimate starts here.
Enter your dimensions and product details to see the quantity and purchase breakdown.
Formula and assumptions
How this calculation works.
Count equal pieces that fit the usable intervals of one board after measured excluded zones and per-piece cut loss. Only user-marked exclusions; no automatic defect identification or strength judgement.
A worked example
Illustrative inputs only. Product properties and design dimensions are not recommendations for your project.
- Measured board length
- 5 m
- Finished equal piece length
- 1 m
- Cut loss reserved per piece
- 0 mm
- Excluded zone start
- 2 m
- Excluded zone end
- 3 m
Equal pieces outside supplied exclusions: 4 pieces
Reserves one kerf per piece. Exclusion boundaries must already include their separation cuts and trimming. Does not identify defects or certify material quality.
Before you purchase
Use dimensions from your plan and properties from your chosen product. Any design spacing, section or fixing pattern must already be specified.
Only user-marked exclusions; no automatic defect identification or strength judgement.
Method: dimensional arithmetic and user-supplied specifications. Software checks: 2026-10-04. Calculation and review policy.