STOCK FIT

Landscape edging piece — usable straight piece length scenarios.

How does changing usable straight piece length affect landscape edging piece when the other inputs stay fixed?

What this decision changes

Full required pieces must fit usable stock. Aggregate area or length alone cannot prove a feasible cut or roll allocation. Method basis: Each run is rounded separately. Corner units are supplied counts and are assumed not to contribute to the measured straight run lengths.

The focus is usable straight piece length. All other shared inputs remain fixed for each evaluated range.

Straight pieces = Σ ceil(run length / usable piece length)Landscape Edging Piece Calculator

Evaluate your supplied alternatives

Start with your measured plan and selected product data. The initial values and range are illustrative. Each scenario changes only usable straight piece length; the other entered values stay fixed.

Display units

Measured plan and product inputs

Usable straight piece length

Separate corner units

Separate end caps

Run 1

Straight run length

Where to get this value

Measure this dimension in your plan or on site and use the displayed unit. For irregular shapes, divide the geometry into the supported sections.

Run 2

Straight run length

Where to get this value

Measure this dimension in your plan or on site and use the displayed unit. For irregular shapes, divide the geometry into the supported sections.

Supplied comparison range for usable straight piece length

Lower supplied comparison value

Upper supplied comparison value

Nine evenly spaced values are evaluated. Whole counts are rounded to distinct integer scenarios. Values between the listed samples are not calculated.

9 evaluated scenarios

Baseline: Straight edging pieces — 5 pieces. Rejected combinations remain visible below.

Quantity to plot

Each bar is one actual calculated straight edging pieces. Horizontal values: usable straight piece length in m.

Usable straight piece length	Straight edging pieces	Change from baseline	Use this scenario
1.2 m	8 pieces	3 pieces	Open in calculator Exact quantity breakdown Straight-to-straight joiners 6 Corner units 4 End caps 0
1.45 m	7 pieces	2 pieces	Open in calculator Exact quantity breakdown Straight-to-straight joiners 5 Corner units 4 End caps 0
1.7 m	5 pieces	0 pieces	Open in calculator Exact quantity breakdown Straight-to-straight joiners 3 Corner units 4 End caps 0
1.95 m	5 pieces	0 pieces	Open in calculator Exact quantity breakdown Straight-to-straight joiners 3 Corner units 4 End caps 0
2.2 m	5 pieces	0 pieces	Open in calculator Exact quantity breakdown Straight-to-straight joiners 3 Corner units 4 End caps 0
2.45 m	5 pieces	0 pieces	Open in calculator Exact quantity breakdown Straight-to-straight joiners 3 Corner units 4 End caps 0
2.7 m	4 pieces	-1 piece	Open in calculator Exact quantity breakdown Straight-to-straight joiners 2 Corner units 4 End caps 0
2.95 m	4 pieces	-1 piece	Open in calculator Exact quantity breakdown Straight-to-straight joiners 2 Corner units 4 End caps 0
3.2 m	3 pieces	-2 pieces	Open in calculator Exact quantity breakdown Straight-to-straight joiners 1 Corner units 4 End caps 0

Read the evaluated results

Look for jumps in purchased stock and rejected fits. The rows show actual evaluated allocations, not an assumption that every intermediate size will behave identically.

Replace every illustrative baseline measurement and selected product value with the inputs for your actual task.
Enter a comparison range on the focused input's stated unit and quantity basis.
Review rejected combinations and use the exact detail lines to distinguish measured demand from whole purchases.
Open an evaluated scenario in the full calculator to save its original inputs and quantity breakdown to a browser material project.

Keep the comparison within scope

Permitted orientation, complete-run requirements and reserved cut losses remain supplied inputs; sampled layouts do not promise a globally optimal cut plan.

Dimensions, layouts, rates and material properties are supplied by the user.

Does not select construction specifications or certify safety.

Only the listed samples are evaluated. Intermediate values, alternate constraints and global cutting optimality are not inferred from the graph.

Continue with this quantity method

Landscape Edging Piece Calculator

Other independent input decisions

Prepare the actual material data

Quantity method and illustrative scenarios checked 6 October 2026. Methods and scope.