SUPPLIED LAYOUT INTERVALS

Pallet helical film roll quantity — pitch already supplied for the wrap scenarios.

How does changing pitch already supplied for the wrap affect pallet helical film roll quantity when the other inputs stay fixed?

What this decision changes

The chosen interval or repeat changes discrete positions, full rows or complete pattern cuts. It is different from a blanket percentage added to area. Method basis: Film path = (height / supplied pitch) × hypot(2(width + length), pitch) + additional complete turns × perimeter + tail extra. Does not recommend film tension, wrap layers, load restraint or safe pallet handling.

The focus is pitch already supplied for the wrap in the first repeated measured entry. Other repeated entries keep their own supplied values.

Film path = (height / supplied pitch) × hypot(2(width + length), pitch) + additional complete turns × perimeter + tail extra.Supplied Pallet Helical Film Roll Quantity Calculator

Evaluate your supplied alternatives

Start with your measured plan and selected product data. The initial values and range are illustrative. Each scenario changes only pitch already supplied for the wrap in the first repeated entry; the other entered values stay fixed.

Display units

Measured plan and product inputs

Selected film roll length

Where to get this value

Use the actual usable quantity or dimensions of the product you intend to buy. Check the label and the unit shown here.

Supplied additional complete turns

Supplied total tail extra

Supplied rectangular load 1 · entry varied by the range

Measured wrap path width

Where to get this value

Measure this dimension in your plan or on site and use the displayed unit. For irregular shapes, divide the geometry into the supported sections.

Measured wrap path length

Where to get this value

Measure this dimension in your plan or on site and use the displayed unit. For irregular shapes, divide the geometry into the supported sections.

Supplied spiral height

Where to get this value

Measure this dimension in your plan or on site and use the displayed unit. For irregular shapes, divide the geometry into the supported sections.

Pitch already supplied for the wrap

Identical loads

Supplied comparison range for pitch already supplied for the wrap

Lower supplied comparison value

Upper supplied comparison value

Nine evenly spaced values are evaluated. Whole counts are rounded to distinct integer scenarios. Values between the listed samples are not calculated.

7 valid of 9 evaluated scenarios

Baseline: Continuous film rolls — 2 rolls. Rejected combinations remain visible below.

Quantity to plot

Each bar is one actual calculated supplied geometric film path. Horizontal values: pitch already supplied for the wrap in m. Only the first repeated entry varies.

Pitch already supplied for the wrap	Supplied geometric film path	Change from baseline	Purchase result	Use this scenario
0.3 m	Every continuous cut must be positive and fit the selected stock.
0.3625 m	Every continuous cut must be positive and fit the selected stock.
0.425 m	18.92948 m	2.804966 m	2 rolls	Open in calculator Exact quantity breakdown Supplied geometric film path 18.92948 m Continuous cuts use decreasing-length first-fit packing. This is a feasible count, not a guarantee of the minimum. Any per-cut extra is explicitly reserved by you. Uses a rectangular perimeter helix with no stretch conversion, tension recommendation or corner deformation model.
0.4875 m	16.53168 m	0.4071667 m	2 rolls	Open in calculator Exact quantity breakdown Supplied geometric film path 16.53168 m Continuous cuts use decreasing-length first-fit packing. This is a feasible count, not a guarantee of the minimum. Any per-cut extra is explicitly reserved by you. Uses a rectangular perimeter helix with no stretch conversion, tension recommendation or corner deformation model.
0.55 m	14.68231 m	-1.442205 m	2 rolls	Open in calculator Exact quantity breakdown Supplied geometric film path 14.68231 m Continuous cuts use decreasing-length first-fit packing. This is a feasible count, not a guarantee of the minimum. Any per-cut extra is explicitly reserved by you. Uses a rectangular perimeter helix with no stretch conversion, tension recommendation or corner deformation model.
0.6125 m	13.21346 m	-2.911053 m	2 rolls	Open in calculator Exact quantity breakdown Supplied geometric film path 13.21346 m Continuous cuts use decreasing-length first-fit packing. This is a feasible count, not a guarantee of the minimum. Any per-cut extra is explicitly reserved by you. Uses a rectangular perimeter helix with no stretch conversion, tension recommendation or corner deformation model.
0.675 m	12.01942 m	-4.105098 m	2 rolls	Open in calculator Exact quantity breakdown Supplied geometric film path 12.01942 m Continuous cuts use decreasing-length first-fit packing. This is a feasible count, not a guarantee of the minimum. Any per-cut extra is explicitly reserved by you. Uses a rectangular perimeter helix with no stretch conversion, tension recommendation or corner deformation model.
0.7375 m	11.03029 m	-5.094224 m	2 rolls	Open in calculator Exact quantity breakdown Supplied geometric film path 11.03029 m Continuous cuts use decreasing-length first-fit packing. This is a feasible count, not a guarantee of the minimum. Any per-cut extra is explicitly reserved by you. Uses a rectangular perimeter helix with no stretch conversion, tension recommendation or corner deformation model.
0.8 m	10.19804 m	-5.926476 m	2 rolls	Open in calculator Exact quantity breakdown Supplied geometric film path 10.19804 m Continuous cuts use decreasing-length first-fit packing. This is a feasible count, not a guarantee of the minimum. Any per-cut extra is explicitly reserved by you. Uses a rectangular perimeter helix with no stretch conversion, tension recommendation or corner deformation model.

Read the evaluated results

Use the evaluated count steps to see when another row, column, drop or position enters the stated layout.

Replace every illustrative baseline measurement and selected product value with the inputs for your actual task.
Enter a comparison range on the focused input's stated unit and quantity basis.
Review rejected combinations and use the exact detail lines to distinguish measured demand from whole purchases.
Open an evaluated scenario in the full calculator to save its original inputs and quantity breakdown to a browser material project.

Keep the comparison within scope

Compare intervals already permitted by your plan or product. No safe spacing, structural layout or fixing requirement is chosen.

Does not recommend film tension, wrap layers, load restraint or safe pallet handling.

Only the listed samples are evaluated. Intermediate values, alternate constraints and global cutting optimality are not inferred from the graph.

Continue with this quantity method

Supplied Pallet Helical Film Roll Quantity Calculator

Other independent input decisions

Prepare the actual material data

Read the measurement and purchase guides

Quantity method and illustrative scenarios checked 6 October 2026. Methods and scope.