STOCK FIT

Sod strip roll — roll width scenarios.

How does changing roll width affect sod strip roll when the other inputs stay fixed?

What this decision changes

Full required pieces must fit usable stock. Aggregate area or length alone cannot prove a feasible cut or roll allocation. Method basis: Strip width equals the selected roll width. The tool deliberately keeps scraps separate; it does not assume offcuts can be used elsewhere.

The focus is roll width. All other shared inputs remain fixed for each evaluated range.

Rolls before allowance = Σ ceil(strip length / roll length) × strip countSod Strip Roll Calculator

Evaluate your supplied alternatives

Start with your measured plan and selected product data. The initial values and range are illustrative. Each scenario changes only roll width; the other entered values stay fixed.

Display units

Measured plan and product inputs

Roll length

Where to get this value

Use the actual usable quantity or dimensions of the product you intend to buy. Check the label and the unit shown here.

Roll width

Where to get this value

Use the actual usable quantity or dimensions of the product you intend to buy. Check the label and the unit shown here.

Extra whole rolls

Shortcuts only; choose your own allowance above.

Where to get this value

Enter your own allowance. Presets are input shortcuts, not a construction recommendation.

Strip group 1

Strip length

Where to get this value

Measure this dimension in your plan or on site and use the displayed unit. For irregular shapes, divide the geometry into the supported sections.

Identical strips

Supplied comparison range for roll width

Lower supplied comparison value

Where to get this value

Use the actual usable quantity or dimensions of the product you intend to buy. Check the label and the unit shown here.

Upper supplied comparison value

Where to get this value

Use the actual usable quantity or dimensions of the product you intend to buy. Check the label and the unit shown here.

Nine evenly spaced values are evaluated. Whole counts are rounded to distinct integer scenarios. Values between the listed samples are not calculated.

9 evaluated scenarios

Baseline: Sod rolls — 6 rolls. Rejected combinations remain visible below.

Quantity to plot

Each bar is one actual calculated covered strip area. Horizontal values: roll width in m.

Roll width	Covered strip area	Change from baseline	Purchase result	Use this scenario
0.3 m	2.7 m²	-1.8 m²	6 rolls	Open in calculator Exact quantity breakdown Covered strip area 2.7 m² Rolls before allowance 6 Offcut area before allowance 0.9 m²
0.3625 m	3.2625 m²	-1.2375 m²	6 rolls	Open in calculator Exact quantity breakdown Covered strip area 3.2625 m² Rolls before allowance 6 Offcut area before allowance 1.0875 m²
0.425 m	3.825 m²	-0.675 m²	6 rolls	Open in calculator Exact quantity breakdown Covered strip area 3.825 m² Rolls before allowance 6 Offcut area before allowance 1.275 m²
0.4875 m	4.3875 m²	-0.1125 m²	6 rolls	Open in calculator Exact quantity breakdown Covered strip area 4.3875 m² Rolls before allowance 6 Offcut area before allowance 1.4625 m²
0.55 m	4.95 m²	0.45 m²	6 rolls	Open in calculator Exact quantity breakdown Covered strip area 4.95 m² Rolls before allowance 6 Offcut area before allowance 1.65 m²
0.6125 m	5.5125 m²	1.0125 m²	6 rolls	Open in calculator Exact quantity breakdown Covered strip area 5.5125 m² Rolls before allowance 6 Offcut area before allowance 1.8375 m²
0.675 m	6.075 m²	1.575 m²	6 rolls	Open in calculator Exact quantity breakdown Covered strip area 6.075 m² Rolls before allowance 6 Offcut area before allowance 2.025 m²
0.7375 m	6.6375 m²	2.1375 m²	6 rolls	Open in calculator Exact quantity breakdown Covered strip area 6.6375 m² Rolls before allowance 6 Offcut area before allowance 2.2125 m²
0.8 m	7.2 m²	2.7 m²	6 rolls	Open in calculator Exact quantity breakdown Covered strip area 7.2 m² Rolls before allowance 6 Offcut area before allowance 2.4 m²

Read the evaluated results

Look for jumps in purchased stock and rejected fits. The rows show actual evaluated allocations, not an assumption that every intermediate size will behave identically.

Replace every illustrative baseline measurement and selected product value with the inputs for your actual task.
Enter a comparison range on the focused input's stated unit and quantity basis.
Review rejected combinations and use the exact detail lines to distinguish measured demand from whole purchases.
Open an evaluated scenario in the full calculator to save its original inputs and quantity breakdown to a browser material project.

Keep the comparison within scope

Permitted orientation, complete-run requirements and reserved cut losses remain supplied inputs; sampled layouts do not promise a globally optimal cut plan.

Dimensions, layouts, rates and material properties are supplied by the user.

Does not select construction specifications or certify safety.

Only the listed samples are evaluated. Intermediate values, alternate constraints and global cutting optimality are not inferred from the graph.

Continue with this quantity method

Sod Strip Roll Calculator

Other independent input decisions

Prepare the actual material data

Read the measurement and purchase guides

Quantity method and illustrative scenarios checked 6 October 2026. Methods and scope.