Supplied Fabric Frame Staple Position Pack calculator.
Count perimeter positions on supplied rectangular frames with corners counted once and your chosen staples per position.
Your inputs
Use measurements from your plan and properties from your chosen product. Any prefilled values are illustrative.
A clear estimate starts here.
Enter your dimensions and product details to see the quantity and purchase breakdown.
Formula and assumptions
How this calculation works.
Perimeter positions = 2 × ceil(width / supplied pitch) + 2 × ceil(height / supplied pitch); multiply by supplied staples at each position. Does not choose an attachment schedule, tension, staple suitability or panel suspension.
A worked example
Illustrative inputs only. Product properties and design dimensions are not recommendations for your project.
- Pitch already specified along frame edges
- 100 mm
- Supplied staples per position
- 1
- Selected staples per pack
- 100
- Measured frame width
- 0.5 m
- Measured frame height
- 1 m
- Identical frames
- 4
Staple packs for supplied positions: 2 packs
Corners are shared between adjoining edges and counted once. Placement and attachment suitability remain supplied.
Before you purchase
Use dimensions from your plan and properties from your chosen product. Any design spacing, section or fixing pattern must already be specified.
Does not choose an attachment schedule, tension, staple suitability or panel suspension.
All dimensions, properties and application patterns are user-supplied. No building-code default is inserted.
Method: dimensional arithmetic and user-supplied specifications. Software checks: 2026-10-06. Calculation and review policy.
Check your purchase assumptions
Connected work guides and comparisons
Explore decorative panels, fabric covers and supplied attachment counts