Flooring calculator.
Calculate flooring packs from your floor area and the coverage on your chosen pack.
Your inputs
Measurement schematic, not to scale. Use your own dimensions and product specification.
Use measurements from your plan and properties from your chosen product. Any prefilled values are illustrative.
A clear estimate starts here.
Enter your dimensions and product details to see the quantity and purchase breakdown.
Formula and assumptions
How this calculation works.
Waste is applied to net area before rounding to whole packs. This does not optimise a cutting layout.
A worked example
Illustrative inputs only. Product properties and design dimensions are not recommendations for your project.
- Length
- 4 m
- Width
- 5 m
- Coverage per pack
- 2 m²
- Waste allowance
- 10 %
Packs to purchase: 11 packs
Coverage arithmetic does not prove that offcuts fit
Pack coverage gives an area estimate. Board orientation, obstacles and usable offcuts can change how a real installation consumes material.
- Use net measured floor area and the actual pack coverage.
- Keep independent rooms separate when their product or cutting requirements differ.
- Treat allowance as your input, rather than a recommendation from this tool.
What changes when one measurement changes?
Using the worked example above, change only length from 4 to 6m. Product specifications and all other inputs stay the same.
Packs to purchase: 11 → 17packs
Both results are computed by the same current calculator engine. These are illustrative dimensions, not material or design recommendations.
Calculation version and responsibility
Formula version: 1. Input schema: 1. Output schema: 1. Material data: user-supplied. Safety text: 1.
The method uses your dimensions and supplied product properties. Software tests check arithmetic examples and validation; this does not establish professional review of a design. Read the calculation policy.
Before you purchase
Use dimensions from your plan and properties from your chosen product. Any design spacing, section or fixing pattern must already be specified.
Method: dimensional arithmetic and user-supplied specifications. Software checks: 2026-10-03. Calculation and review policy.