MEASURED QUANTITY SENSITIVITY

Floor covering packs — coverage per pack scenarios.

How does changing coverage per pack affect floor covering packs when the other inputs stay fixed?

What this decision changes

This measured quantity or supplied dimension enters the method on its stated unit basis. Other inputs stay fixed so its effect can be separated from net deductions, stock constraints or purchase rounding. Method basis: Waste is applied to net area before rounding to whole packs. This does not optimise a cutting layout.

The focus is coverage per pack. All other shared inputs remain fixed for each evaluated range.

Packs = ceil(area × (1 + waste) ÷ pack coverage)Flooring Calculator

Evaluate your supplied alternatives

Start with your measured plan and selected product data. The initial values and range are illustrative. Each scenario changes only coverage per pack; the other entered values stay fixed.

Display units

Measured plan and product inputs

Length

Where to get this value

Measure this dimension in your plan or on site and use the displayed unit. For irregular shapes, divide the geometry into the supported sections.

Width

Where to get this value

Measure this dimension in your plan or on site and use the displayed unit. For irregular shapes, divide the geometry into the supported sections.

Coverage per pack

m²

Where to get this value

Use the actual usable quantity or dimensions of the product you intend to buy. Check the label and the unit shown here.

Waste allowance

Shortcuts only; choose your own allowance above.

Where to get this value

Enter your own allowance. Presets are input shortcuts, not a construction recommendation.

Supplied comparison range for coverage per pack

Lower supplied comparison value

m²

Where to get this value

Use the actual usable quantity or dimensions of the product you intend to buy. Check the label and the unit shown here.

Upper supplied comparison value

m²

Where to get this value

Use the actual usable quantity or dimensions of the product you intend to buy. Check the label and the unit shown here.

Nine evenly spaced values are evaluated. Whole counts are rounded to distinct integer scenarios. Values between the listed samples are not calculated.

9 evaluated scenarios

Baseline: Packs to purchase — 11 packs. Rejected combinations remain visible below.

Quantity to plot

Each bar is one actual calculated packs to purchase. Horizontal values: coverage per pack in m².

Coverage per pack	Packs to purchase	Change from baseline	Use this scenario
1.2 m²	19 packs	8 packs	Open in calculator Exact quantity breakdown Floor area 20 m² Area with allowance 22 m² Purchased coverage 22.8 m²
1.45 m²	16 packs	5 packs	Open in calculator Exact quantity breakdown Floor area 20 m² Area with allowance 22 m² Purchased coverage 23.2 m²
1.7 m²	13 packs	2 packs	Open in calculator Exact quantity breakdown Floor area 20 m² Area with allowance 22 m² Purchased coverage 22.1 m²
1.95 m²	12 packs	1 pack	Open in calculator Exact quantity breakdown Floor area 20 m² Area with allowance 22 m² Purchased coverage 23.4 m²
2.2 m²	10 packs	-1 pack	Open in calculator Exact quantity breakdown Floor area 20 m² Area with allowance 22 m² Purchased coverage 22 m²
2.45 m²	9 packs	-2 packs	Open in calculator Exact quantity breakdown Floor area 20 m² Area with allowance 22 m² Purchased coverage 22.05 m²
2.7 m²	9 packs	-2 packs	Open in calculator Exact quantity breakdown Floor area 20 m² Area with allowance 22 m² Purchased coverage 24.3 m²
2.95 m²	8 packs	-3 packs	Open in calculator Exact quantity breakdown Floor area 20 m² Area with allowance 22 m² Purchased coverage 23.6 m²
3.2 m²	7 packs	-4 packs	Open in calculator Exact quantity breakdown Floor area 20 m² Area with allowance 22 m² Purchased coverage 22.4 m²

Read the evaluated results

Read calculated demand, whole purchases and exact detail lines separately. This specific input may change quantity continuously, cross a purchase step or make the stated geometry or stock fit invalid.

Replace every illustrative baseline measurement and selected product value with the inputs for your actual task.
Enter a comparison range on the focused input's stated unit and quantity basis.
Review rejected combinations and use the exact detail lines to distinguish measured demand from whole purchases.
Open an evaluated scenario in the full calculator to save its original inputs and quantity breakdown to a browser material project.

Keep the comparison within scope

Compare measurements or already specified alternatives. Quantity sensitivity does not establish material suitability or construction requirements.

Only quantities from supplied dimensions and specifications are calculated.

No material-property reference values are bundled; obtain product values from the selected supplier's data sheet.

Only the listed samples are evaluated. Intermediate values, alternate constraints and global cutting optimality are not inferred from the graph.

Continue with this quantity method

Flooring Calculator

Other independent input decisions

Prepare the actual material data

Read the measurement and purchase guides

Quantity method and illustrative scenarios checked 6 October 2026. Methods and scope.